MachineTools.com：全球领先的金加工行业的在线市场

ITEM / MODEL		UM-85
Controller		FANUC 0i - M 
SPINDLE
Spindle speed		rpm	8000 (10000)
Spindle nose taper	　-	BT40
Bearing inner diameter	mm	70
Drive system		mm	Belt
		
TRAVELS
X-axis travel		mm	850
Y-axis travel		mm	550
Z-axis travel		mm	550
Spindle nose to table	mm	150~700
		
TABLE
Table dimension				mm	1100 × 600
T-slot (No. of T-slot × width × pitch)	mm	5 × 18 × 100
Max. weight on table			kg	1000
		
FEED RATES
(X/ Y/ Z) Rapid traverse rate	m/min	30 / 30 / 30
Cutting feed rate		m/min	12
Ball screw diameter		mm	Ø 45
Guideway type			 -	Linear
		
AUTOMATIC TOOL CHANGE SYSTEM
Tool magazine capacity			pcs	24 (32)
Max. tool weight			kg	7
Max. tool diameter			mm	80
Max. tool diameter without adjacent tools	mm	150
Method of tool exchange			　-	Arm type
Max. tool length			mm	300
		
MOTOR
Spindle motor power (Cont. / 30 min)	kW 	7.5 / 11 (15 / 18.5)
X/Y/Z feed motor			kW	3 / 3 / 4
Coolant pump motor (50 Hz / 60 Hz)	kW	0.53 + 0.85 / 0.75 + 1.27
		
OTHERS
Air supply			kg/cm²	5.5
Machine weight			kg	7000
Machine dimension (L × W × H)	m	2.7 × 2.2 × 3.0