MachineTools.com：全球领先的金加工行业的在线市场

1-used Acra Model ATL-1118A CNC Toolroom Lathe, new 2001.

                          Specifications:
Swing over bed........................................... 11"
Swing over cross slide.................................... 6"
Swing over carriage....................................... 9"
Distance between centers................................. 18"
Spindle nose diameter................................. 2.189"
Spindle nose type............... degree taper (Hardinge type)
Spindle speeds................................. 0 - 4,000 rpm
Hole through spindle.................................. 1-1/4"
Bar capacity.......................................... 11/16"
X-axis travel......................................... 6-1/4"
Z-axis travel........................................ 13-1/2"
Rapid traverse....................................... 787 ipm
Tailstock quill taper.................................. #2 MT
Tailstock quill travel................................ 3-3/4"
Motor.......................................... 5 Hp/3/60/220
Dimensions (approx.)...................... 87"W x 44"D x 78"H
Weight (approx.)................................... 2,200 lb.


                          Equipped with:
Anilam 4200T CNC control, with CNC or Manual Operation & Teach 
  Programming, RS232, & Disc Reader
Electronic hand wheels on X & Z axes
Constant surface speed
Hardened & ground bed
Tailstock
Manual compound
Dual reading dials on compound & tailstock
5C Lever collet closer
Miscellaneous tooling
Coolant system
Enclosure

http://www.agreenco.com/forsale.html