TK-Trump-C series cantilever type CNC water cutting platform(common specifications)
model TK-Trump-C1530
travel of each axis  X-axis  1550mm
 Y-axis  3050mm
Z-axis  200mm (can be customized)
cutting range  X-axis  1500mm
 Y-axis  3000mm
 Z-axis  180mm (can be customized)
drive motor  AC servomotor with coder (Panasonic/Yaskawa)
drive component X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way
Z-axis drive: precise linear slider stage
Three-axis full servo drive (available of cutting 3D graphics)
maximal workpiece weight 4000kg (500kg/m2)
 NC control system  TKW-NC Studio three-axis CNC water cutting control system
control precision X-axis, Y-axis, Z-axis: 0.001mm
reposition accuracy X-axis, Y-axis, Z-axis: less than ±0.04mm
 cutting tolerance Less than ±0.08mm 
plane straightness accuracy  Less than ±0.08mm
plane verticality Less than ±0.04mm/300mm
moving speed 0-15m/min.
cutting speed 0-15m/min
water and dust proof All motion parts are tightly protected against water and dust, the  casing of the CNC cutting platform is totally stainless steel.
protection of power break The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
lubricating system the fully-automatic lubricating system does not need any manual operation, automatically lubricating all movement component.
water level control system Water level control to perform cutting underwater, splashless and noiseless. (optional)
sludge removal system hydro forcing the settled sludge toward all directions during the cutting, and sucks it from the pre-embedded pipelines into the sludge removal system, greatly saves the cost due to manual operation and machine stop time. (optional)
automatic abrasive supply system use air pressure to continuously, stably deliver abrasive from an externally-mounted bulk to the cutting head. (optional)