TK-Trump-C series cantilever type CNC water cutting platform(common specifications)
model
TK-Trump-C1540
travel of each axis
X-axis
1550mm
Y-axis
4050mm
Z-axis
220mm/320mm (optional)
cutting range
X-axis
1500mm
Y-axis
4000mm
Z-axis
200mm/300mm (optional)
drive motor
AC servomotor with coder (Panasonic, YASKAWA or FUJI)
drive component
X, Y-axis drive: ABBA or TBI precise ball screw, ABBA or HIWIN linear guide-way
Z-axis drive: precise linear slider stage
Three-axis full servo drive (available of cutting 3D graphics)
maximal workpiece weight
4000kg (500kg/m2)
NC control system
TKW-NC Studio three-axis CNC water cutting control system
control precision
X-axis, Y-axis, Z-axis: 0.001mm
reposition accuracy
X-axis, Y-axis, Z-axis: less than ±0.04mm
cutting tolerance
Less than ±0.05mm
plane straightness accuracy
Less than ±0.05mm
plane verticality
Less than ±0.04mm/300mm
moving speed
0-18m/min.
cutting speed
0-15m/min
water and dust proof
All motion parts are tightly protected against water and dust, the casing of the CNC cutting platform is totally stainless steel.
protection of power break
The computer can accurately remember and restore the position of processing point when power cut occurs in the process of cutting.
lubricating system
the fully-automatic lubricating system does not need any manual operation, automatically lubricating all movement component.
water level control system
Water level control to perform cutting underwater, splashless and noiseless. (optional)
sludge removal system
hydro forcing the settled sludge toward all directions during the cutting, and sucks it from the pre-embedded pipelines into the sludge removal system, greatly saves the cost due to manual operation and machine stop time. (optional)
automatic abrasive supply system
use air pressure to continuously, stably deliver abrasive from an externally-mounted bulk to the cutting head. (optional)