MachineTools.com: El mercado líder de la industria metalmecánica mundial

STOCK NUMBER: 2544
MANUFACTURER: BRITISH ARM
AGE: 1988

SPECIFICATIONS:
   - Max. Tube Diameter: 1.2" (15 mm)
   - Min. Tube Diameter: .500" (12.7 mm)
   - Max. Wall Thickness: .070" (1.8 mm)
   - Min. Wall Thickness: .027" (.7 mm)
   - Max. D/T Ratio: 60:1
   - Min. D/T Ratio: 10:1
   - Max. Material Yield: 50,000 PSI
   - Max. Mill Speed: 450 FPM  (138 MPM) Max. Gear In Speed, No Load
   - Driven Spindle Diameter: 2" (50.8 mm)
   - Hand of Operation: Left to Right

ENTRY EQUIPMENT:
1 - Double 4,000 Lb. Uncoiler w/Air Brakes
1 - GUILD Shear Welder
1 - KENT Floop #3066

FORMING MILL:
1 - Entry Guide Unit
3 - Driven Breakdown Stands
4 - Idle Side Roll Units
3 - Driven Fin Stands
2 - Idle Side Roll Units

WELDING SECTION:
1 - THERMATOOL 200 KW Welder
1 - Seam Guide Unit
1 - Weld Pressure Unit, 3-Roll
1 - Double OD Scarfing Unit
1 - Tube Guide

COOLANT SECTION:
1 - Coolant Zone                                                                                                                                                    

SIZING MILL:
4 - Driven Sizing Stands
4 - Idle Side Roll Units
1 - Rotary Squaring Turkshead Unit
                      
CUT-OFF:
1 - BETARAM Model E24-1.5" x .100" w/TALLEYRAND Digital Length Control
1 - Runout Table
1 - Encoder

ELECTRICAL:
   - Solid State DC Drive System, 45 HP x 2 Motor (40KW)

TOOLING to Produce the Following Sizes of Tube:
   - Rounds-mm: 15.88, 16, 16.25, 17.2, 18, 18.2, 18.39, 19.05, 19.85, 20, 
     20.3, 21.3, 22, 22.2, 24, 24.75, 24.8, 25, 25.4, 26, 28, 28.58
   - Squares & Rectangles-mm: 12.7, 15.88, 19.05, 25.4 x 12.7, 22.2, \
     30 x 15, 18.6 x 12.5, 19 x 13, 20 x 15, 26.3 x 15, 28.2 x 13.2, 30 x 16,
     22.2 x 12.7, 30 x 14, 23.4 x 13.3, 26.2 x 16.2

CONDITION: Very Good As Taken From Service.