MachineTools.com: El mercado líder de la industria metalmecánica mundial

LOOPCO 54" x 7" x 30,000 LB SLITTING LINE 
3 ARM TURNSTILE:
  54" ARM LENGTH 
  NO PUSHOFF 

3 ARM TURNSTILE:
  62" ARM LENGTH 
  NO PUSHOFF 

ENTRY COIL CAR:
48" BED WIDTH 
L TYPE
17" from front face to "V"
23" from center of "V" to back plate
  
UNCOILER: LOOPCO 30,000 LB
  SERIAL #800 J6 129 A & B 
  OVERALL MANDREL LENGTH:  54"
  COIL I.D. RANGE:  14" W/FILLER PLATES FOR 20" ID
  4 SEGMENT MANDREL
  TRAVERSING BASE 
  HYDRAULIC EXPANSION 
  AC MOTOR THREADING DRIVE W/AIR CLUTCH
  WICHITA WATER COOLED BRAKE 

-COMBINATION HOLDDOWN ROLL, PEELER TABLE: LOOPCO
  SERIAL #800 J6130 
  RUBBER COATED HOLDDOWN ROLL 

-ENTRY CROP SHEAR: ROYALTON 
  HYD. DOWNCUT TYPE
  60" WIDE 

-3 SLITTER HEADS: LOOPCO
Drop In Style
  (2) HEADS - 7" DIA. X 54" FACE ARBORS 
   S/N:  6442-D 12860 
   S/N:  6150A 123 19B
  (1) HEAD - 5" DIA. X 54" FACE ARBORS
   S/N:  800J 611 320G
  SINGLE ECCENTRIC ARBOR ADJUSTMENT
  KNIFE DIA.: MIN 11"/12" MAX. 
  15 HP AC THREADING DRIVE, 1740 RPM 
  40 HP DC MOTOR, 500 V 

-SCRAP WINDER 

-TENSION STAND: STAMCO
 ENTRY CATENARY PIT ROLLS
 ENTRY PASSLINE ROLLS
 ENTRY SEPARATOR TOOLING BAR
 PAD TYPE TENSION 
 EXIT ROLL

-EXIT CROP SHEAR: ROYALTON (Monarch Stamco)
  HYD. DOWNCUT TYPE
  60" BLADE LENGTH 
  EXIT PASSLINE ROLLS

-RECOILER: LOOPCO
  S/N:  800 J6134C 
  58" MANDREL OVERALL LENGTH 
  16" ID WITH FILLER PLATES FOR 20" 
  MAX. COIL O.D.:  79" (must confirm) 
  HYD. CLAMP AND EXPANSION
  DUAL DIRECTION GRIPPER
  HYDRAULIC PUSHOFF 
  OVERARM SEPARATOR 
  100 HP RELIANCE DC MOTOR, 500/2000 RPM, 500 V, W/BLOWER
   240 FIELD VOLTS, HOLDING BRAKE 
  2 SPEED GEARBOX, S/N: L-4547, MODEL 140-D
   INPUT RPM:  500
   RATIOS: 8.34/25.03:1
  APPROX. WEIGHT: 27,000 LBS.

2 CRATES OF KNIVES/SPACERS & 1 CRATE RUBBERS 
1 Skid of filler plates

-THE LINE HAS 2 BRAND NEW CMC (Cleveland Motion Controls) DRIVES ALONG WITH A NEW AUTOMATION DIRECT PLC.