MachineTools.com: El mercado líder de la industria metalmecánica mundial

EQUIPPED WITH THE FOLLOWING:

-4 ARM ENTRY TURNSTILE:
  MACHINE NO.: 4381
  SALES NO.: 288 81 7A
  53" ARM LENGTH
  SWING RADIUS: 84.5"
  HYDRAULIC ROTATION
  HYDRAULIC LOCK 
  C-HOOK TYPE ARMS W/7" W x 10.25" H SLOT
  PASSLINE: 49" FROM FLOOR TO TOP OF ARM
  OVERALL SIZE: 169" L x 62" W x 53" HIGH

-MANDREL TYPE UNCOILER:
  MACHINE NO.: 4381
  SALES NO.: 288 81 9A
  HYDRAULIC EXPANSION
  11.5" DIA. MAIN SHAFT
  65" FACE MANDREL
  (4) SEGMENT MANDREL
  16" - 20" I.D. W/24" PADS
  TRAVERSING BASE 
  POWERED HOLDDOWN ROLL
    8" DIA. x 24" FACE ROLL 
    RUBBER COVERED W/BANDING SLOT 
    HYD. MOTOR DRIVEN
  AC MOTOR THREADING DRIVE W/AIR CLUTCH
  WICHITA WATER COOLED BRAKE
  PASSLINE: 40" FROM FLOOR TO CENTER OF MANDREL
  OVERALL SIZE: 180" L x 73" W x 82" HIGH

-NORTH AMERICAN EDGE GUIDE SENSOR 

-ENTRY PEELER TABLE:
  HYD. UP/DOWN, IN/OUT
  ENTRY DRIVEN PINCH ROLLS
    6" DIA. x 66" FACE
  ENTRY EDGE GUIDE ROLLERS

-ROTARY KNIFE CROP SHEAR 

-(2) REMOVABLE SLITTER HEADS:
  MACHINE NO.: 4381
  SALES NO.: 288 81 13A
  6.50" DIA. x 63.5" FACE ARBORS  
  PARALLEL TOP ARBOR ADJUSTMENT
  JET NUTS
  75 HP DC DRIVE MOTOR, 1150/2000 RPM, 500 V
  2 SPEED BOX W/4.148 AND 8.296:1 RATIO'S
  QUICK CHANGE DISCONNECTS 
  HYDRAULIC POWER STAND CLAMPING 
  OVERALL SIZE: 155" L x 38" W x 82" HIGH

-(2) SCRAP WINDERS
  HYDRAULIC OSCILLATION 
  AUTO DUMP

-LOOPING PIT WITH RETRACTABLE THREADING TABLE
  ENTRY/EXIT GUIDE ROLLS 

-SYNCROWIND TENSION STAND
  MACHINE NO.: 4381
  SALES NO.: 288 81 17A
  COMBINATION PAD/ROLL TYPE 
  ENTRY SEPARATOR TOOLING BAR
  ENTRY STRIP HOLDDOWN ROLL
  ENTRY PASSLINE ROLL
  DRAG WIPE PADS
    AIR BAG OPERATED
  POLYURETHANE COATED ROLLS 
    16" DIA. x 64.625" FACE WIDTH
    WICHITA WATER COOLED BRAKE ON BOTTOM ROLL
  EXIT CROP SHEAR
    UPCUT TYPE
    66" LONG BLADE
  EXIT PASSLINE ROLL W/TACH GENERATOR
    14" DIA. x 66" FACE WIDTH
    POLYURETHANE COATED
  EXIT THREADING TABLE
  OVERALL SIZE: 106" L x 85" W x 78" HIGH

-RECOILER: NEW IN 1985
  SALES NO.: 466 85 18A
  16" DIA. x 66" FACE DRUM (30,000# CAPACITY)
    DRUM AND SHAFT ASSEMBLY
    10.25" DIA. MAIN SHAFT
  20" DIA. x 66" FACE DRUM (40,000# CAPACITY)
    DRUM AND SHAFT ASSEMBLY
    12" DIA. MAIN SHAFT
    24" DIA. BOLT ON PADS
  POWERED CLAMP AND EXPANSION
  HYDRAULIC PUSHOFF
  OVERARM SEPARATOR
  100 HP GE DC MOTOR W/BLOWER & HOLDING BRAKE
    650/1950 RPM, 500 V
  H&S MARK II HELICAL SPEED REDUCER
    RATED AT 100 HP @ 650 RPM INPUT
    2 SPEEDS: 12.76 & 25.51:1 RATIOS
  PASSLINE: 40" FROM FLOOR TO CENTER OF DRUM
  OVERALL SIZE: 195" L x 96" W x 97" HIGH
  
-EXIT COIL CAR 
  ABOVE FLOOR TYPE "L" DESIGN
  66" WIDE BED
  72" O.D. CAPACITY
  APPROX. 10" FROM FLOOR TO BOTTOM OF "V" CRADLE
  NARROW COIL RETAINING ARMS
  SELF CONTAINED HYDRAULICS
  6" BORE HANNA HYDRAULIC LIFT CYLINDER
  RETRACTABLE CABLE REEL
  OVERALL SIZE: 96" L x 66" W x 60" HIGH

-4 ARM EXIT TURNSTILE:
  MACHINE NO.: 4381
  SALES NO.: 288 81 20A
  76.75" ARM LENGTH
  SWING RADIUS: 108.25"
  HYDRAULIC ROTATION
  HYDRAULIC LOCK
  HYDRAULIC PUSHOFF
  C-HOOK TYPE ARMS W/7" W x 14" H SLOT
  PASSLINE: 49" FROM FLOOR TO TOP OF ARM
  OVERALL SIZE: 216.5" L x 64" W x 82" HIGH

-CENTRAL OPERATORS CONTROL CONSOLE

-MOTOR CONTROL SWITCHGEAR 

-TOOLING INCLUDING KNIVES, SPACERS, RUBBERS & SHIMS 

-REMOVED AND IN STORAGE