March Consignment Sale
1-Pratt & Whitney Viking, Dynapath, Delta 50 CNC Control Horizontal CNC Machining Center, S/N 3090-0029, (1979) 50-3,600 RPM Spindle, 50-Taper, Coolant System, Table Surface 52 x 40, Weight Capacity 7,500#, Approximate Weight 28,700, New Spindle Bearings & CNC Retrofit In 1998, 300-IPM, Rapid Rate (Will Require Rigger To Remove) (Clinton Twp, MI.)
1-Freightliner Model FL60, 16’ Stake Bed Truck, VIN. 1FV36JAC9VH759069 (1996), Mounted Tool Box, 6-Mounted 4” Nylon Winch Straps, 215,348 Miles, CAT CFE 190 Engine, Original Owner (Clinton Twp, MI)
1-Ditch Witch Model 1820HE, (2002) Trencher, S/N 1W1481, Custom Made Backfill Blade, 1,476-Lbs. Approximate Weight, 104 Hours (Original Owner, Stored Inside) Pick Up At Location-Trailer Required (Whitmore Lake, MI.)
1-Greenlee #Greenlee 882, Conduit Bender, Includes Hydraulic Pump And All Shoes, 300-Lbs. Pick Up At Our Location, Shipping A Possibility-Buyer To Pay All Shipping Costs (Whitmore Lake, MI)
1-Siemens Catalog #ID1Y015C, Transformer, Nema 3R Rated Enclosure, 130-Lbs., Brand New-Never Installed, Pick Up At Our Location, Shipping A Possibility-Buyer To Pay All Shipping Costs (Whitmore Lake, MI)
1-Denison Model WR87MC, 8-Ton Hydraulic “C” Frame Press, S/N 28069 (1982), Dual Palm Buttons, Crank Type Length, Of Stroke Adjustment, Approximate Weight 3,000-Lbs., 12” Stroke Max, 16” Daylight, 7-1/2” Throat, Can Load Only Onto Flat Bed Truck, No Enclosed Vans Will Be Loaded (Warren, MI)
1-Magnalift Model Spec MU-2C, 10,000-Lbs. Electric Lift Magnet, S/N 27299, 12-Volt DC Requires Batteries (Not Included) (Jackson, MI)
1-Ingersoll-Rand Model C10M2, Centac C10M2 Centrifugal Air Compressor, S/N M86-3825, New 1986, 250-HP, 3600 RPM, 480 Volt, Flange Mounted Motor, 1000 ICFM Air Capacity, 2 Stage, 125 PSI Discharge, Moisture Separator, Inlet Air Filter, Microprocessor Control Panel, Water Cooled Air And Oil Cooler, 77 Gallon/Minute Water Use, Oil Free Air, Machine Rebuilt In 1994, Has Been Properly Stored Since 1994 (Jackson, MI)
1-New Britain 6955 Automatic Chucker, S/N 40138, New 1980, 6 Spindle, 6-9-1/2” 3-Jaw Power Chucks, 9-1/2” Max Swing Of Work, 8” Max Longitudinal Travel Tool Slide, 3 Cross Slides, 2-3/4” Max Feed Lower Front And Rear Cross Slides, Spindle Speeds 36-803 RPM With Proper Change Gears (Catalog Specifications) Trabon Automatic Lube System, 2-Push Button Control Stations, Electrical Panel Connected For 440V Operation And 110V Control Circuit, 2-HP, 3/60/440 Pump Motor, 50-HP, 3/60/440 Main Drive Motor, Rebuilt And Rescraped Cross Slides (Jackson, MI)
1-Kent-Owens 2-20, Horizontal Production Mill, S/N 2-20 (New 1940), 12” x 42” Table, 20” Table Travel, 1-80 IPM Table Feed, 9” Vertical Adjustment, Table Surface To Spindle Center 13” Max, 4” Min., Quill Adjustment 3”, Spindle #40 Taper, Diameter Of Spindle Nose 3-1/2 IPF, Diameter OF Thru Hole 21/32”, Spindle Speed Range: 32-428 RPM (With Proper Change Gears) Equipped With: Arbor Support, 5-HP Spindle Drive (Jackson, MI)
1-Littell Model 40-12, 4000# Coil Reel, S/N 82923-77-2 (New 1977), 15-20” ID Range Of Coil, 12” Max Width Of Coil, 60” Max OD Of Coil, Electric Brake, 4 Arms With 3 Keepers (Jackson, MI)
1-Pratt & Whitney #1E, 12” x 42”Jig Bore, S/N 26973, Anilam Digital Readout .0001 & Tooling, Approximately 8,000-Lbs., Mint Condition (Livonia, MI)
1-Myford Model MG12, 5” x 12” O.D. Grinder, S/N 57168, Assorted Center, Approximately 1,200-Lbs., Refitted With Dayton Variable Speed Motor On Head, Must Supply Own Machine Mover (Livonia, MI)
1-Speed Space Div. Commercial Structures Corp. 10W x 20L x 9’-7” In-Plant Office, S/N A5421 (2000), Fully Insulated Forklift Slots Raised Floor, Wired To NEC Standards, 4000-Lbs., Solid One Owner Unit (Bay City, MI)
1-Rowe Model 7530-DSJ-DE, Double End Coil Reel, S/N 26308, 7,500-Lbs. Capacity Per Side, 30” Coil Width Capacity, Push Button Mandrel Expansion, Adjustable Brakes, Jog Drive On Spindles, Main Controls (Roseville, MI)
1-Thread Roller-Kaiser Flat Die Incline #50 Heavy Duty 4 Speed 34-HP W440V Under Power, Approximate Weight 25,000-Lbs. (Chesterfield, MI)
1-Conveyor Slider Belt 30” x 70 (7-10’ Sections) ¾-HP Variable Drive One New And One Used Belt, Approximate Weight 2,000-Lbs. (Chesterfield, MI)
1-Tubar Model A-750#, “Dump King” Drum Dumper, S/N 111210, 750-Lbs. Max Container Size 23” Diameter, 34-3/4” High, Clamp Extensions Included For Smaller Diameter Barrels, Dump Height 21-1/2”, Dump Angle 45 Degrees (135 Degree Rotation) Batteries Not Included (Newark, DE)
1-C.W. Brabender Model 12-31-000, Granu-Grinder, S/N K9488, Complete With Motor Starter, Self Contained And On Wheels (Newark, DE)
1-American Compactor Inc. Model A55-1001-6PB, 55-Gallon Pneumatic Compactor (2008) (Newark, DE)
1-American Compactor Inc. Model A55-1001-6PB, 55-Gallon Pneumatic Compactor (2008), Platform 25’L-R x 18” F-B/PSI 120, 3,400-Lbs. (Newark, DE)
1-American Compactor Inc. Model A55-1001-6PB, 55-Gallon Pneumatic Compactor, Platform 25’ L-R x 18” F-B/PSI 120, 3,400-Lbs. (2008) (Newark, DE)
1-American Compactor Inc. Model A336-1001-8PB, Pneumatic Compactor For Cubic Yard Boxes, Platform 44” L-R x 36” F-B/PSI 120, 6,000-Lbs. (2008) (Newark, DE)
우리를 도와 주세요! 번역 또는 교정 제출