MachineTools.com: The Leading Worldwide Metalworking Industry Marketplace

Width of plate max.   10.000 mm 
Bending at full plate width   6 mm 
No. of rollers   3 
Driven rollers    3 
Arrangement of the rollers    symmetrical 
Operating speed   3 m/min 
Drive of the rollers    hydraulic 
Adjustable rollers   2 
Roller material   34CrNiMo6 
Surface treated up to   900-1050 N/mm² 
Hardened and rinded,      
Top Rollerdiameter:   80 mm 
Bottom Rollerdiameter:   80 mm 
Max. roller pressure    960 kN 
Max. Slope of rollers   160 mm 
Max. adjustment of the top roll    600 mm 
Adjustment speed of the top roller without pressure    500 mm/min 
Adjustment speed of the top roll with pressure    0-120 mm/min 
Adjustment drive of the bottom roll    electro-mechanical 
Adjustment speed of the bottom rolls   120 mm/min 
Center distance of the bottom rolls    120-400 mm 
Max. slope of the bottom rolls    160 mm  
Tilting of the end bearing    hydraulically 
Lubrication   twice central 

 

Capacity: 

Sheets width till 4.500 mm max. 10 mm prebending length 60 mm 
Sheets width till 6.800 mm max. 8 mm prebending length 50 mm 
Sheets width till 10.000 mm max. 6 mm prebending length 40 mm 
Min. sheet thickness 0,8 mm 
Min. bending radius 50 mm 
The indicated capacities are based to a top roll dia. Of 100 mm
The capacities are reduced by 20 % when at a dia. Of 80 mm. 

 

Total installed power   50 kW 
Power supply   380V/50Hz 
Cooling water:    
Consuption of cooling water max.   0,5 m³/h 
Water pressure   2 bar