Upgrade Your Browser

• Sell Your Machines
• Recently Added Machines
• Recently Added Tooling
• Recently Added Equip. & Acc.
• Recently Added Wanted Listings
• Recently Added Jobs
• Search Industry Directory
• Add Your Company
• Edit Your Company

Industry News > Haas Drill and Tap Machine Features Milling Capability

Haas Drill and Tap Machine Features Milling Capability

Oxnard, CA - The new DT-1 from Haas Automation, Inc., is a compact, high-speed drill and tap machine with full milling capabilities. The machine features a generous 20" x 16" x 15.5" work cube and 26" x 15" T-slot table, while maintaining a very small footprint. A powerful BT30 taper spindle spins to 15,000 rpm, and allows tapping at speeds to 5000 rpm. The spindle is coupled directly to the motor for smooth, quiet operation and extreme thermal stability. A 15-hp vector drive system provides 46 ft-lb (peak) of cutting torque for milling and boring operations.

The DT-1 is equipped with a high-speed, 20-pocket, servo-driven tool changer that swaps tools in 0.8 seconds. High-speed 2400 ipm rapids combine with 1G acceleration rates to shorten cycle times and reduce non-cutting time. The maximum cutting feedrate is 1200 ipm.

For efficient chip removal, the DT-1 features steeply sloped internal sheet metal. Optional twin chip augers transport chips to the rear of the machine for discharge. A 45-gallon flood coolant system is standard, with options for a programmable coolant nozzle and high-pressure through-spindle coolant systems.

Built in the USA by Haas, the DT-1 drill and tap machine is backed by the worldwide network of Haas Factory Outlets - the most extensive system of support and service in the industry. For more information about Haas Automation and Haas products, call 800-331-6746, or visit www.HaasCNC.com.