EWALD 1005
Model 1005 Single Electrode Tack Welding Tool (Standard), firing pressure adjustable 5-15lbs and Ground Probe combination heavy-duty clamp and anvil, both with 3-ft. #6 ga. cable
EWALD 1204D
POWER DE-REELER MODEL 1204D 125-150 LB CAPACITY 1 1/4 - 1 1/2" SHAFT DIA 5" PULLEY STANDARD
EWALD 1235A
RIM DRIVE DE-REELER MODEL 1235A ACCOMMODATES SPOOLS UP TO 36" IN DIA 18" WIDE FEATURES: DC DRIVE AUTOMATIC SPEED CONTROL
EWALD 3003
Miniature Precision Head 4 oz to 4 lb (Model 3003) Pressure range 4 oz. to 4 lbs. 1 oz. to 2 lbs. Low force model(3003-L)
EWALD 3015
Micro-Miniature Precision Head 10 to 50 grams Fuse-Tec tm Micro Welding Head - Model 3015 1. This welding head is designed for welding extremely delicate parts such as cross-wire welds below .002"...
EWALD 3020
Standard Head 5-50 lbs. Pressure(Model 3020) Maximum stroke is about l". The head can be adjusted up and down on the column to accommodate different applications. The weld pressure is adjusted by u...
EWALD 7007
Non-Synchronous AC Timer Power Supply Model 7007 - rated 3/4 KVA - 115/230 VAC Thermocouple Welder Recomended hand tool model 1005
EWALD 7020
Non-Synch. AC Timer Power Supply Model 7020 - rated 2 KVA, wired for 208-230 VAC No Heat Setting Only Timer.
EWALD 7020B
Non-Synch. AC Timer Power Supply Model 7020B - rated 2 KVA, wired for 208-230 VAC No Heat Setting Only Timer.
EWALD 8020
AC POWER SUPPLY SYNCHRONOUS MODEL 8020 Synchronous AC Timer Power Supply rated 2 KVA and wired for 208-230VAC single phase, 50 Hz.
EWALD 8025
EWALD 8050
AC POWER SUPPLY SYNCHRONOUS MODEL 8050 Synchronous AC Timer Power Supply, rated 5 KVA - wired for 230VAC, 60 Hz
EWALD 8100
AC POWER SUPPLY SYNCHRONOUS MODEL 8100, Synchronous AC Timer Power Supply, rated 10 KVA - wired for 230VAC, 60 Hz
EWALD 8200
EWALD 9007
EWALD 9020
EWALD 9050
EWALD 9100
EWALD 9200
EWALD AUTOMATIC HOSE
AUTOMATIC HOSE CUTTERS, CUTTING CAPACITY OF STAINLESS STEEL OVERBRAIDED HOSE UP TO 5/8"DIAMETER.)
EWALD FLASH CUTTER 950
The Automatic Flash Cutter has a carriage propelled by a DC Motor Drive.On the carriage is a set of fingers which grab the end of the cable and pull it out to a pre-set length. Electrodes are appli...
EWALD SS41APX
DUAL VOLTAGE 2.5 KVA ON 230V OR 1.5 KVA ON 115V LINE SAME AS SS41AX BUT AIR OR HAND OPERATION
EWALD SS41EP
Flash Stripper Model SS41EP (230V) Rated 5 KVA, including eyeshield & blank jaws P/N A2544-1
EWALD SS41HP
Flash Stripper Model SS41HP (230V) Rated 10 KVA, including eyeshield & blank jaws P/N A2544-1
EWALD SS48C
SS48C BENCH MODEL FLASH CUTTER 2.5 KVA Flash Cutter Model SS48C/2.5 KVA 230V OR 115V @ Reduced output rated 2.5 KVA, with 1 set jaws #A4860-1 - including foot switch & guard
EWALD SS48C/1
EWALD SS48C/10
EWALD SS48C/2.5
SS48C BENCH MODEL FLASH CUTTER 2.5 KVA Flash Cutter Model SS48C/2.5 KVA 230V OR 115V @ Reduced output - rated 2.5 KVA, with 1 set jaws #A4860-1 - including foot switch & guard
EWALD SS48C/5
SS48C BENCH MODEL FLASH CUTTER 5 KVA, Flash Cutter Model SS48C/5 230V rated 5 KVA, with 1 set jaws #A4860-1 including foot switch & guard,
EWALD SS52/ 3/4
EWALD SS52AS
SS52AS MINIATURE PRECISION FLASH CUTTER Flash Cutter (Complete with Stretch) - with jaws A5126-1