MAKINO EDFH-1
Makino now offers a high-accuracy fine-hole machining configuration on the ultra-precision EDAC-1 sinker EDM platform. The EDFH1 is a re-configured EDAC-1 machine that incorporates a fine-hole mach...
MAKINO EDBV8
The newly developed water-based EDBV8 (Electrical Discharge Blade and Vane) machine has been designed to produce the cooling and shaped diffuser holes for gas turbine engines for the Aerospace and ...
MAKINO BX3
The Makino BX3 machine is purpose-built for the EDM Drilling demands of high volume production applications of cooling film hole features that are found in Blade and Vane turbine engine components....
MAKINO EDBV3
The newly developed water-based EDBV3 (Electrical Discharge Blades and Vanes) machine has been specifically designed for blade and vane machining in the aerospace and power generation industries. T...
MAKINO EDAF3-FH
Makino builds on the existing capabilities and features of its proven EDAF-Series sinker EDM machines by adding a special fine-hole machining configuration that is used to produce high-accuracy EDM...
MAKINO EDAF2-FH
Makino builds on the existing capabilities and features of its proven EDAF-Series sinker EDM machines by adding a special fine-hole machining configuration that is used to produce high-accuracy EDM...
MAKINO EDAF2
The EDAF2 sinker EDM boasts a new mechanical design intended to increase rigidity and reduce thermal distortion, especially for machines installed in uncontrolled environments or used over the cour...
MAKINO EDNC20
MAKINO EDAC1
The world’s most accurate Ram EDM, Makino’s EDAC1, is capable of producing corner radii of 0.00019 inches (0.005mm) and surface finish quality of 0.000024 inches (0.6 micron) Ry. This machine achie...
MAKINO EDNC21
MAKINO EDAF3
The EDAF3 sinker EDM boasts a new mechanical design intended to increase rigidity and reduce thermal distortion, especially for machines installed in uncontrolled environments or used over the cour...
MAKINO EDNC15
MAKINO EDGE2I
The EDGE2i machine brings an effective combination of high performance and versatility to Sink EDM operations. The EDGEi-Series machines are configured with many productive technologies to efficien...
MAKINO EDGE3I
The advanced technologies and intelligent design of the EDGEi-Series machines deliver an unparalleled value, capability, and reliable productivity to Sinker EDM operations. The EDGE3i machine provi...
MAKINO EDNC17
The EDNC17 offers the same utility and capability as the smaller EDNC15 machine, but provides larger X/Y strokes and a larger work tank area. Excellent access to the Work Zone is provided with the...
MAKINO EDNC10
MAKINO EDNC8
MAKINO EDNC6
MAKINO U6 H.E.A.T
Makino’s new U6 and U6 H.E.A.T. wire EDM machines redefine the expectations of versatility and user-friendliness that matter to the EDM industry. The features and technologies incorporated into the...
MAKINO U6
Makino’s new U6 and U6 H.E.A.T. wire EDM machines redefine the expectations of versatility and user-friendliness that matter to the EDM industry. The features and technologies incorporated into the...
MAKINO U1310
MAKINO UP6 H.E.A.T
The UP6 H.E.A.T. Wire EDM is designed for Ultra Precision machining, and is capable of achieving work piece positional accuracies of 1 micron (0.00004”) over its entire travel. This level of preci...
MAKINO U6 H.E.A.T. EXTREME
The Makino U6 H.E.A.T. Extreme Wire Electrical Discharge Machine (Wire EDM) is the fastest in the industry. Its innovative EDM technology uses a 0.016” (0.400mm) coated wire to achieve the fastest ...
MAKINO U3I
The U3i Wire EDM harnesses an unparalleled combination of productivity and efficiently for the most demanding work: High Speed Machining and Fine Surface Finish capability with greater Precision!
MAKINO U6I
High Precision Wire EDM. The productive versatility of High Speed, High Accuracy, and Fine Surface Finish capabilities on a large platform Wire EDM machine make the U6i a standout winner for any shop.
MAKINO U53J
Makino’s Uj-Series of WEDM machines, the U32j and the U53j, take accuracy and finish capabilities to a higher level. Targeted to applications in precision plastic injection molds, engineered plasti...
MAKINO U86
A part of Makino’s award-winning U-Series of wire EDM machines, the U86 relies on advanced generator technology for significantly faster cycle times while achieving superior surface finishes and wo...
MAKINO U32J
Makino’s Uj-Series of WEDM machines, the U32j and the U53j, take accuracy and finish capabilities to a higher level. Targeted to applications in precision plastic injection molds, engineered plasti...
MAKINO UPN-01
The UPN-01 represents the next leap forward in technology for ultra-precision machining and surface finish capability of small/fine wire operations. The machine features a unique horizontal wire dr...
MAKINO UPV-3
The UPV-3 and UPV-5 ultra-high-precision WEDM machines are designed with an oil dielectric system for precision machining of carbides and other hardened materials used in the manufacturing of tooli...
MAKINO UPV-5
The UPV-3 and UPV-5 ultra-high-precision WEDM machines are designed with an oil dielectric system for precision machining of carbides and other hardened materials used in the manufacturing of tooli...
MAKINO U3
Makino’s new U3 and U3 H.E.A.T. wire EDM machines redefine the expectations of versatility and user-friendliness that matter to the EDM industry. The features and technologies incorporated into the...
MAKINO U3 H.E.A.T
Makino’s new U3 and U3 H.E.A.T. wire EDM machines redefine the expectations of versatility and user-friendliness that matter to the EDM industry. The features and technologies incorporated into the...
MAKINO T2
Makino’s new T2 5-axis horizontal machining center dramatically increases titanium-milling efficiency, combining lean manufacturing methods and increased metal-removal rates for today’s aerospace a...
MAKINO a71
The a71 horizontal high-speed milling machine is rapidly becoming one of the most popular platforms for high-volume machining of parts made of cast iron and light alloys. Spindle integration with t...
MAKINO a82
a82 for Large Part Machining The a82 HMC brings a new level of performance to large part machining, including diesel engine components or any large part requiring longer travel in the X-axis. Desi...
MAKINO A92
a92 HMC for Construction Equipment Manufacturing The a92 brings high-efficiency machining to large part production. Designed for unparalleled stiffness and rigidity, the a92 is the ideal machine p...
MAKINO A99E
Ideally suited for manufacturing in the diesel engine block, transmission and semiconductor markets, the A99E accepts loads up to 4,400 lbs., with an optional upgrade to 6,600 lbs. (3,000 kg). A 40...
MAKINO MAG3.W
MAG3.W 5-axis horizontal machining center is specifically designed for high-productivity aerospace machining of complex aluminum monolithic parts. With a larger Y-axis than the MAG3.EX, the MAG3.W...
MAKINO A500Z
Makino is excited to announce the newest addition to our family of high capability horizontal machining centers, the five axis a500Z. This versatile machine builds upon the industry leading perform...
MAKINO A100E
The A100E provides a large workzone of 74.8” in diameter by 59.1” in height larger than other Makino horizontal machining centers. It is 20 percent heavier than any other Makino a-Series machine, w...
MAKINO MCC2516-VG
The Makino MCC2516-VG HMC streamlines the machining and processing of large plastic injection molds. The variable geometry head enables rough and finish of large molds in a single setup. The tiltin...
MAKINO A51NX-5XU
Manufacturers of medical, aerospace, prototype and complex multi-face parts have long understood the advantages of 5-axis machining. Five-axis machining capability can improve productivity and qual...
MAKINO A51NX
The Makino a51nx is a 400mm horizontal machining center that builds on the highly successful a51 platform with key high performance machining technologies that take productivity, accuracy and machi...
MAKINO A61NX
The a61nx is a 500mm, 40-taper production horizontal machining center. The a51nx and a61nx share key machine technologies that take part productivity, accuracy and machine reliability to the next l...
MAKINO A40
Introducing the Makino a40, a first-of-its-kind horizontal machining center purpose-designed and built to address the challenges of non-ferrous die cast parts production.