BAILEIGH SN-F04-MS
If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is great for making perfect corners in m...
BAILEIGH SN-F09-MS
The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools. This corner notcher has a 9...
BAILEIGH SN-F11-AN
The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal. The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so...
BAILEIGH SN-F16-FN
Notching corners is a staple of any fabrication shop. Good clean notches are the difference between a great product and a not so great one. The SN-F16-FN sheet metal corner notcher is an economic...
BAILEIGH SN-F16-HN
The SN-F16-HN manual corner notcher is a high quality cast iron sheet metal notcher perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6" x 6" ...
BAILEIGH SN-V04-MS
Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right? Enter the SN-V04-MS; this great machine is a 220 volt three ...
BAILEIGH TN-125M
Sometimes that need for a reliable manual pipe notcher pops up when you least expect it. That is where the TN-125M from Baileigh Industrial comes in. This ninety degree pipe notcher can be bolted...
BAILEIGH TN-200E
Do you make 90 degree notches in schedule 40 pipe all day, every day? Then the TN-200E is for you. This electric tube notcher was specifically designed to notch schedule 40 pipe ranging in sizes ...
BAILEIGH TN-200M
The TN-200M is the monster of the Baileigh Industrial manual pipe notcher line. This manual pipe notcher has the ability to notch 1-1/2” and 2” schedule 40 pipe at 90 degrees. Like all Baileigh I...
BAILEIGH TN-210H
Are you looking to notch tubing economically? If so there is nothing better than a hole saw style tube notcher. The TN-210H is the perfect tube notching machine for the economical garage fabricat...
BAILEIGH TN-250
Ever have to notch tube in an awkward place, like say on a bend? Well good luck getting a tight clamp with the conventional tube notchers on the market. Baileigh Industrial took this challenge he...
BAILEIGH TN-300
The TN-300 pipe notcher from Baileigh Industrial is the best production hole saw notcher on the market today. This 110 volt notcher is built using only the best components. The idea of the TN-300...
BAILEIGH TN-400
Abrasive style belt notchers have been around for a long time and over that time many have tried, Baileigh Industrial included, coming up with something better. And while the newer machines did do...
BAILEIGH TN-50M
If you only need to notch small sizes of schedule 40 pipe, then the TN-50M manual pipe notcher is for you. The TN-50M might be small but it sure delivers enough punch to cope ¼”, 3/8”, and ½” sche...
BAILEIGH TN-600
If you are looking for a high quality top rated abrasive tube notcher made in the USA. Then look no further, the TN-600 from Baileigh Industrial is just what you are looking for. This abrasive tu...
BAILEIGH TN-800
If you are a shop that wants the best in tube and pipe equipment, then you have to look at the TN-800 tube and pipe notcher from Baileigh industrial. This patented (patent No: 6,435,783) design do...
BOSCHERT EAGLE
BOSCHERT K 30-120
BOSCHERT K30-120 MINI S
BOSCHERT LB 13 KE
BOSCHERT LB 13 KE QUICK
BOSCHERT LB 15/2000
BOSCHERT LB12/4
BOSCHERT LB12/6
BOSCHERT LB13
The LB 13 Standard is the basic model of its line and permits notching with a fixed angle of 90°. lt guarantees clean cuts in all sheet metal thicknesses and high repetitive accuracy of the notchi...
BOSCHERT LITE
BOSCHERT PN
8-7/8" x 8-7/8" x 5/32" BOSCHERT POWER NOTCHER MODEL PN4 S/N 1969 Year 1993 Capacity .........
CHICAGO DREIS & KRUMP HN-25
Chicago Dreis & Krump's productive, reliable, heavy duty, hydraulic notcher for all your notching needs. It will shear mild steel and stainless at high production speeds and it's a snap to operate....
DAKE DLN-6200
This corner Notcher has a 6mm or 4-gauge mild steel capacity, so it can make quick work of most any job. The DLN-6200 sheet metal corner Notcher machine has blades that are fixed at 90°, ensuring a...
DAKE DLN-6220V
This model hydraulic Notcher will cut notches from 30 to 140 degrees in mild steel and up to 6mm in thickness and will do this at a maximum rate of 15 strokes per minute. 24 Ton Capacity 4 Ga. Mild...
ERCOLINA EN100
Ercolina’s EN100 Pipe and Tube Notcher is ideal for hand railing, chassis and roll cages, fences and gates, furniture frames, marine rails and arches, tubing and plumbing for restaurant and dairy. ...
ERCOLINA EN180
EUROMAC FA200/6
HECK WFN1
HECK WFN2
Pipe and Tubing Notchers We offer the fastest and easiest tools for fabrication of pipe and tubing notches. Creating 90° notches in the ends of tube for fence, railings, cages, and frames has never...
HECK WFN3
Pipe and Tubing Notchers We offer the fastest and easiest tools for fabrication of pipe and tubing notches. Creating 90° notches in the ends of tube for fence, railings, cages, and frames has never...
HECK WFN4
Pipe and Tubing Notchers We offer the fastest and easiest tools for fabrication of pipe and tubing notches. Creating 90° notches in the ends of tube for fence, railings, cages, and frames has never...
RAMS 2001
Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades.
SCOTCHMAN AL1
The AL1 can be used to notch 3/4", 1" and 1-1/4" Schedule 40 Pipe. This hand-operated machine can easily be wall mounted.
SCOTCHMAN AL2
The AL2 can be used to notch 1-1/2" and 2" Schedule 40 Pipe. This machine can easily be wall mounted.
SCOTCHMAN AL3
The AL3 can be used to notch 1-1/4" and 1-1/2" Schedule 40 Pipe. This machine can easily be wall mounted.
SCOTCHMAN ALU
The ALU can be used to notch a sink outflow in pipes with an external diameter of 1.0630" to 2.40158".
SIMASV AF226-B
The fixed angle notching machine AF226 has a compact structure, and a shearing head in GS500 fusion with downwards movement. The workbench is fitted with conical slots for housing of the squares. T...
SIMASV AF228
The AF 228/B is designed specifically to deliver excellent fixed angle notching services. The compactly built machine is outfitted with a shearing head in GS500 fusion, featuring downwards maneuver...
SIMASV AF258/P
The AF.258/P is manufactured by Simasv and is a fixed angle notching equipment that has been pre-arranged for the mounting of the punch head. The shearing head of the model is mounted on robust col...