+GF+ MIKRON HEM 600
Conscientious cost control along the design phase led to a product that integrates the best of GF Machining Solutions technologies in a modern, reliable milling machine affordable for a large custo...
+GF+ MIKRON HSM 700
Experience shows that the advantages of high-speed milling can only be realized at cut speeds of more than 40'000 min-1, high feedrates and the best accelerations available – especially in the case...
HAAS DM-2
Drill/Mill Center; 28" x 16" x 15.5" (711 x 406 x 394 mm), 40 taper, 15 hp (11.2 kW) vector drive, 15,000 rpm, 2400 ipm (61 m/min) rapids, high-speed 18+1 side-mount tool changer, power failure det...
HAAS DT-2
Drill/Tap Center; 28" x 16" x 15.5" (711 x 406 x 394 mm), BT30 taper, 15 hp (11.2 kW) vector drive, 15,000 rpm, 2400 ipm (61 m/min) rapids, high-speed 20+1 side-mount tool changer, power failure de...
HAAS TM-1
Toolroom Mill; 30" x 12" x16" (762 x 305 x 406 mm), 40 taper, 7.5 hp (5.6 kW) vector drive, 4000 rpm, full enclosure, Coolant Pump Kit, Intuitive Programming System, 1 MB program memory, memory loc...
HAAS TM-1P
Toolroom Mill with Tool Changer; 30" x 12" x 16" (762 x 305 x 406 mm), 40 taper, 7.5 hp (5.6 kW) vector drive, 6000 rpm, full enclosure, 10-station automatic tool changer, Intuitive Programming Sys...
HAAS VF-2
Vertical Machining Center; 30" x 16" x 20" (762 x 406 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 20-station carousel tool changer, 1000 ipm (25.4 m/min) rapid...
HAAS VF-2SS
Super-Speed Vertical Machining Center; 30" x 16" x 20" (762 x 406 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, high-speed 24+1 side-mount tool changer, 1400 i...
HAAS VF-2SSYT
Super-Speed Vertical Machining Center; 30" X 20" X 20" (762 x 508 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, high-speed 24+1 side-mount tool changer, 1400 i...
HAAS VF-2YT
Vertical Machining Center; 30" X 20" X 20" (762 x 508 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 20-station carousel tool changer, 1000 ipm (25.4 m/min) rapid...
HAAS VM-2
Vertical Mold Making Machine; 30" X 20" X 20" (762 x 508 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, 24+1 side-mount tool changer, 710 ipm (18.0 m/min) rapid...