GANESHالمغزل متعددة ماكينات المسمار التلقائية

بطاقة الهوية
162075
علامة تجارية
حالة
الجديد في المخزن
السنة
2018
الموقع
California
الولايات المتحدة الامريكية
الثمن

الوصف

CNC Automatic Screw Machine Twin Spindle 6-Axis Production Turning Center (With full “C” Axis on the main and sub spindle) Genturn-52 GTS 6-Axis, 2” Bar, 5” Chucking Capacity, 6,000 RPM Simultaneously Machine on the Main and Sub Spindle • “C”-Axis on both spindles for Live Tool Applications • Dual Parallel Gang-Tooled Slides • Fastest Chip-To-Chip Time in This Machine Class • Rigid Tapping on both spindles • Integral 15-Horsepower Motor Spindles • Parts Catcher with parts conveyor belt • Chip Conveyor

المواصفات

تحويل المواصفات للمتري
عامود الدوران#
2
القدرة
15 hp
الأبعاد
L 118” , W 54”, H 78”
الوزن
9922 lbs
CNC تحكم
CNC (Mitsubishi CNC Control)

MACHINE SPECIFICATIONS: GENTURN-52 GTS
Main & Subspindle
Spindle Motors: 11kw 30-minute rated 15 HP (spindle motor chiller included)
Maximum RPM 6,000 RPM with spindle orient
Spindle Bearing 5-bearing spindle, 3-front ball bearings, 2-rear
Spindle Nose A2-5
Collet Nose Traub A-52 (3J, 16C, adapters available)
Drawtube ID 2.086” (53mm)
Collet Capacity 2.047” (52mm)
Spindle Center Height to Cross-Slide 3.464” (88mm)
Spindle Center Height to Floor 42.2” (1070mm)
Machine Axis
Axis Drives & Motors (1.0kw) 1.35-HP Mitsubishi Mel-Pro Motors and Drives
X-axis Travel: Twin cross-slides 13” (330mm) on both gang slides
Z-axis Travel: Twin opposed spindles 10.63” (270mm) (on both main and subspindle)
Axis Servo Motor Power X-axis 2.0 HP (1.5 kW), Z-axis 1.5 HP (1.0 kW)
Rapid Travel Speed – X & Z 1,181 IPM (30m/ minute)
Z-Axis Thrust 714 lbs. thrust (8574 in/lbs.)
Minimum input unit 0.0001” (0.001mm = 40 millionths of a inch)
Tooling
OD Turning Tool Size 3/4” standard
ID Turning Tool Size 20mm (¾” available)
Cross-Slide T-Slot dimensions 5-T-Slots on 32mm centers. (10mm slot, 18mm base)
Fluid Systems
Coolant Tank Capacity 52 Gallons (210L) with coolant flow monitor
Coolant Pump Dual ¾-HP, 45-PSI pumps (for main and subspindle)
Hydraulic System: (550psi) 10-gallons (45 liters) ISO VG32 (Mobil DTE-24)
Spindle Oil Cooler System 5.5-gallons (25 liters) ISO 10 (Mobil Velocite No. 6)
Way Lubrication distribution (ISO-VG68) .5-gallons (2-liters) distributed at 3-6 cc / 15-minute cycle
Machine Dimensions
Length 118” (2,980 mm) + chip conveyor
Width 54” (1,356 mm) + 21” coolant tank
Height 78” (1,760 mm)
Net Weight 9,922 lbs. (4,500 kg)
Machine Requirements
Power Requirements 220vac ±5%, 3-phase, 60-Hz, 63 Amps, 24Kva
Air Requirements 85-psi, 10-cfm (parts catcher, parts ejector, air blast)

عن البائع

معلومات وجهة نظر الشركة