WARNER & SWASEY 3A M-3500برج مخارط (رام والسرج)

بطاقة الهوية
232145
علامة تجارية
موديل
حالة
مستعملة - جيد
السنة
1970
الموقع
Texas
الولايات المتحدة الامريكية
عودة السياسة
30 يوم
رقم المخزن
L630459

الوصف

3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Ref.#L630459 Model: 3500 lot 72 Serial No. 2420623 New: 1970 Swing Over Bed Ways 23-1/2" Swing Over Cross Slide Carriage 18" Center Distance 43" Spindle Hole 6-1/4" Spindle Speeds 12 To 851 Rpm's Spindle Nose A-15 Chuck Size (Not Pictured) 21" 4 - Jaw New Feeds Cross .0025 To .082 I.P.R. Feeds Long. .005 To .167 I.P.R. Main Motor 40/20 Hp. 480 Volts Flange Holders 4 Weight 15,000 Lbs. Floor Space 180" L. X 83" W. Machine Height 64" Coolant Yes Tool Post 4 Way On Front Yes Rapid Traverse Front And Rear Yes Fixed Rear Turret Yes Condition Very Good Note: Machine Will Have Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New 21"-4-Jaw Gator Chuck W/ Reconditioning. Machine Will Be Cleaned, Painted And Cycled. Machine May Be Seen Under Power With Proper Notice. Price: Please Call

المواصفات

تحويل المواصفات للمتري
الأرجحة
24 "
نوع
Saddle
الأبعاد
180" X 83"
الوزن
15,500 lbs.

3 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
Ref.#L630459
Model: 3500 lot 72
Serial No. 2420623
New: 1970

Swing Over Bed Ways 23-1/2"
Swing Over Cross Slide Carriage 18"
Center Distance 43"
Spindle Hole 6-1/4"
Spindle Speeds 12 To 851 Rpm's
Spindle Nose A-15
Chuck Size (Not Pictured) 21" 4 - Jaw New
Feeds Cross .0025 To .082 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor 40/20 Hp. 480 Volts
Flange Holders 4
Weight 15,000 Lbs.
Floor Space 180" L. X 83" W.
Machine Height 64"
Coolant Yes
Tool Post 4 Way On Front Yes
Rapid Traverse Front And Rear Yes
Fixed Rear Turret Yes

Condition Very Good
Note: Machine Will Have Rear Aprons And Rapid Traverse Box Reconditioned. Rapid Traverse Drive Box Reconditioned, New Bearings, In Main Motor. New Feed And Rapid Shafts. Headstock Cleaned And Flushed, New Filters And Oil. New 21"-4-Jaw Gator Chuck W/ Reconditioning.
Machine Will Be Cleaned, Painted And Cycled.
Machine May Be Seen Under Power With Proper Notice.

Price: $Please Call

عن البائع

معلومات وجهة نظر الشركة