ECOTECH M2120المطاحن الداخلية

بطاقة الهوية
258552
علامة تجارية
موديل
الموقع
Illinois
الولايات المتحدة الامريكية
رقم المخزن
33267
33267
صور ( 7 )

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على ECOTECH M2120 ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .

بطاقة الهوية
258552
علامة تجارية
موديل
الموقع
Illinois
الولايات المتحدة الامريكية
رقم المخزن
33267

الوصف

No. M2120,Ecotech,2"-8"I.D. Range,8"Grind Depth, 5.5HP.,Dresser,Tlng,Clnt,'04

المواصفات

تحويل المواصفات للمتري
الأرجحة
23.62 "
أقصى تجليخ للثقب
8 "
المشوار
23.62 "

Serial No. 337
New - 2004
SPECIFICATIONS:
Diameter of Bore Ground................................50-200mm (2"-8")
Depth of Bore Ground - Maximum
50 - 80 Bore Diameter...................................120mm (4.72")
80 - 150 Bore Diameter..................................150mm (5.90")
150 - 200 Bore Diameter.................................200mm (7.87")
Swing of Work - with Hood - Maximum......................400mm (15.75")
Swing of Work - without Hood - Maximum...................600mm (23.62")
Table Stroke - Maximum...................................600mm (23.62")
Workhead Spindle Center to Bottom of Bed................1210mm (47.64")
Swivel of Workhead - Maximum.................................30 Degrees
Transverse Movement of Workhead - Maximum.................250mm (9.84")
Work Speed (Infinitively Varied)..........................100 - 500 RPM
Table Speed - Grinding....................1.5 - 6 m/min. (59-236"/min.)
Table Speed - Dressing......................0.1 - 2 m/min. (4-80"/min.)
Table Speed - Maximum..............................6 m/min. (236"/min.)
Table Movement per Turn of Handwheel......................12 mm (0.47")
Graduation of Wheel Feed:
per Division of Feed Handwheel......................0.002mm (0.0001")
per Turn of Feed Handwheel............................0.4mm (0.0157")
per Division of Regulating Handwheel.................0.01mm (0.0004")
per Turn of Regulating Handwheel.........................2mm (0.079")
Cycles for Wheel Feed per Minute - Maximum...................30 min. -1
Periodic Wheel Feed Amount.................0.002-0.008mm (0.001-0.002")
Wheel Speed (5)...........................11000/8000/6000/5000/4000 RPM
Grinding Wheel Motor........................................4kW (5.3HP)
Workhead Motor..............................................2.2kW (3HP)
Hydraulic Pressure for Guideway Lub.............0.1 MPa (14.5 Lbf/in.2)
Hydraulic Pressure for Working System......0.8-1 MPa (116-145 Lbf/in.2)
Hydraulic Oil Pump............................63 l/min. (16.6 Gal/min.)
Hydraulic Oil Pump Motor....................................1.5kW (2HP)
Coolant Pump...................................25 l/min. (6.6 Gal/min.)
Coolant Pump Motor......................................0.09kW (0.12HP)
Grinder Dimensions - Actual.........................105"L x 57"W x 66"H
Coolant & Parts Dimensions - x 22"W x 32"H
Approximate Weight..................................3340 Kg (7496 Lbs.)
EQUIPPED WITH:
Newall Model A50 DRO 12" Scale for Wheelhead Feed
Hydraulic Grinding Wheel Dresser
(2) Spindles: (1) 16" High Speed Spindle (1) 21" Low Speed Spindle
4" & 5-1/2" Grinding Wheel Extensions
(6) Pullys for Grinding Spindle Speeds
Wheel Balancer
Coolant Tank
Books, Manuals & Drawings
*Preliminary Specifications Subject to Verification.

عن البائع

معلومات وجهة نظر الشركة