راقب
  • 10-4 with7" throated riser
  • 10-4 with swing away center support
راقب

سن تروسFELLOWS 10-4

Connecticut, الولايات المتحدة الامريكية

نظرة عامة

علامة تجارية
موديل
بطاقة الهوية
313271
النوع
حالة
تستخدم - ممتاز
السنة
1980
الموقع
Connecticut
الولايات المتحدة الامريكية
عودة السياسة
30 يوم
رقم المخزن
10-4x4
الوصف
This Fellows 10-4 was completly remanufactured in 2014. The machine is equiped with a brand new Fanuc CNC controller. The machine can cut 10” max pitch dia (internal and external) with a 4” face width and max 4DP for spur gears. With the CNC control the machine does not need change gears, simplifing the setup.
المواصفات
تحويل المواصفات للمتري
أقصى قطر للترس10"
الأبعادL 91" x w60" x H91"
الوزن12,000lbs
CNC تحكمCNC (18imb5)

ورقة المواصفات

FELLOWS 10-4 FOUR AXIS CNC (FANUC) SHAPER The machine has been 100% remanufactured as follows: Both upper and lower worms and wheels will be inspected, replaced if necessary and adjusted for proper back-lash and bearing pattern. Cutter spindle bushing will be refit to factory specifications All bearings, seals and belts will be replaced with new components that meet or exceed factory specifications. Relay electronics will be upgraded to a state of the art Fanuc Model 18IMB-5 four axis controller with color display. The hydraulic infeed system will be replaced with a ball screw and AC servo motor. The hydraulic and lube system will be combined into a single compact unit integral with the machine. Work table ways will be re-ground and the table hand scraped for proper bearing patterns All parts will be inspected and replaced when necessary Machine will be striped, cleaned, body filled and painted This FELLOWS 10-4 will be capable of performing with in the original manufactures precision parameters when the machine was delivered new. PRINCIPAL SPECIFICATIONS Maximum Pitch Diameter (External)……..……………………….………. 10” Maximum Pitch Diameter (Internal)……..………….…………………….. 10” Maximum Face Width, External & Internal……………………….………. 4” Maximum Diametral Pitch, Spur …..……………………………………… 4DP Maximum Diametral Pitch, Helical……..…………………………………. 5DP Bore Through Work Spindle………………………………………………. 5.875” Cutter Spindle Diameter………...…………..…………………………...… 3.543” Maximum Helix Angle With Special Guides……………………………… 45 deg Distance Between Work Table and Cutter Spindle ……………...…..……. 10” Maximum OD of Fixture…………………………………………………... 19” Dimensions Length……………………………………………………………… 91” Height………………………………...………….……………….... 91” Width…………………………………………..………………….. 60” Machine net weight, approx…………………………………….……..…… 12,000 lbs. STANDARD EQUIPMENT: Standard straight spur guide 15 Hp AC main drive stroking motor. Stroking speed from 50-400. Other SPM available upon request Programmable 15Hp AC variable drive to control stroking speed. 480VAC 3Phase 60HZ 60Amp Power The CNC will control the following axis: Work table rotation (no change gears required) Cutter spindle rotation Work table infeed Cutter spindle stroking speed Centralized auto lube that is continually monitored by the computer Machine comes as a complete unit and requires minimal setup (power, oil and coolant). Coolant sump in base Removable chip basket Crowning feature via back off cam Fully air-condition electrical cabinet Cutter elevation PROGRAMED FEATURES: CNC controller has Macro screens for “Operator friendly” question and answer setups. NO PROGRAMING NEEDED. One to four cut selected by CNC controller Each cut has individual parameters for: Depth of cut Infeed rate Stroking speed Rotational feed rate Degree of work rotation Setups can be stored in nonvolatile memory using a setup number between 1-9999 Recut mode allows the operator to bring the part into size without changing the programed parameters. Optional hydraulic clamping and tail stock can be automatic or manually controlled OPTIONAL EQUIPMENT Hydraulic work clamping Tailstock (fixed or swing away) 3” additional riser. 24 5/8” casting. 13” from top of table to cutter spindle 6” additional riser. 27 5/8” casting. 16” from top of table to cutter spindle 7” Throated riser (35” swing diameter) 17” from top of table to cutter spindle 9” additional riser. 30 5/8” casting. 19” from top of table to cutter spindle 12” additional riser. 33 5/8” casting. 22” from top of table to cutter spindle Tilting Table: allows face gears to be cut at 90º (±10º) and tapered gears at15º 
Stroke length extended to 5” or 6” True stroke positioning 2” of travel Full Enclosure Chip conveyor belt WARRANTY: One year warranty on parts and labor. Machine to be supplied with unconditional 30-day money back, return privilege warranty. Warranty is not transferable. Second year warranty can be purchased.
عن البائع

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على FELLOWS 10-4 ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .

رؤية المزيد من العقارات المعروضة من هذا النموذج

thumb

FELLOWS 10-4

سن تروس

كوريا الجنوبية
thumb

FELLOWS 10-4

سن تروس

تستخدم - ممتاز | North Carolina, الولايات المتحدة الامريكية
thumb

BARBER COLMAN 10-4

سن تروس

تستخدم - ممتاز | 1971 | Michigan, الولايات المتحدة الامريكية
thumb

FELLOWS 10-4

سن تروس

الولايات المتحدة الامريكية

رؤية المزيد من العقارات المعروضة من هذا النوع

thumb

MICROMATIC GEAR 3073

سن تروس

تستخدم - ممتاز | Michigan, الولايات المتحدة الامريكية
thumb

FELLOWS FS-180

سن تروس

تستخدم - ممتاز | 1993 | Michigan, الولايات المتحدة الامريكية
thumb

STANKO 5M150 NC

سن تروس

كوريا الجنوبية
thumb

STANKO IS - S 1000

سن تروس

كوريا الجنوبية
عرض جميع

رؤية المزيد من العقارات المعروضة لهذه العلامة التجارية

thumb

FELLOWS FS-180

سن تروس

تستخدم - ممتاز | 1993 | Michigan, الولايات المتحدة الامريكية
thumb

FELLOWS

اكسسوارات تروس

Michigan, الولايات المتحدة الامريكية
thumb

FELLOWS 4B STEERING SECTOR

سن تروس

1976 | Connecticut, الولايات المتحدة الامريكية
thumb

FELLOWS 615A

سن تروس

تستخدم - ممتاز | Michigan, الولايات المتحدة الامريكية
عرض جميع