GLEASON 116مولدات والعتاد شطبة

بطاقة الهوية
344986
علامة تجارية
موديل
حالة
تستخدم - ممتاز
السنة
1997
الموقع
Michigan
الولايات المتحدة الامريكية
رقم المخزن
10620

الوصف

Immediately Available, 18" Maximum Gear Pitch Diameter, 2.3" Maximum Face, Equipped with Fanuc 18T Control, Enclosed Guarding, Hydraulic Clamping, 6 Axis Digital Read Out, Coolant System, Stock Divider, Magnetic Chip Seperator

المواصفات

تحويل المواصفات للمتري
أقصى قطر للترس
18 "
نوع
Rougher/Finisher
الأبعاد
126" x 102" x 84"
الوزن
24,000 lbs
CNC تحكم
CNC (Fanuc 18T)

EQUIPPED WITH:
Fanuc 18T
Enclosed Guarding
Hydraulic Clamping
6 Axis DRO
Coolant System
Stock Divide
Magnetic Chip Separator

SPECIFICATIONS:

WORKPIECE CAPACITY:
Automotive Version (Jobbing Version)
Y Extreme Ratio: 4:1 (10:1)
Y Cone Distance: Max (30 Deg. Spiral Angle & 12" Dia. Cutter: 7.40 (9.00")
Full Depth, Maximum: 1.00"
Face Width, Maximum: 2.30" (2.750")
Range of Tooth Numbers: 5 to 150 Inclusive
Maximum Gear Pitch Dia. of: (18.00")
Typical 30 Deg. Spiral Ang.: 14.00"
Gear Using 12" Dia. Cutter: 14.00" (16.00")
At The Following Ratios: 10.50" (12.75")
Diametral Pitch (Coarsest): 2.00"

MACHINE SPECIFICATIONS:
Machine Center to Nose Of Spindle: 2.50" to 13.50"
Root Angle: -12 Deg. to 66 Deg. (-12 Deg. to 90 Deg.)
Sliding Base: Withdraw 2",Advance 3"
Vertical Offset: 4.50" Up and Down
Cutter Spindle Rotation Angle (Tilt): 0 Deg. to 180 Deg.
Swivel Angle: 0 Deg. to 355 Deg.
Eccentric Angle: 0 Deg. to 160 Deg.
Cradle Angle: Deg. to 180 Deg.

AXIS SPEEDS - MAXIMUM:
Y Cutter Spindle: 115 RPM

WORKSPINDLE DIMENSIONS:
Diameter of Tapered Hole at Large End: 3 29/32"
Taper Per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through Spindle: 3 1/16"
Diameter of Spindle Nose: 5 1/2"
Length x Width x Height: 126" x 102" x 84" (Width can be adjusted to 90")
Weight: 24,000 lbs

عن البائع

معلومات وجهة نظر الشركة