250 TON PRESSMASTER H-FRAME PRESS MODEL HFP-250/20MWH   SPECIFICATIONS: RATED CAPACITY, TONNAGE....................... 250 STROKE........................................ 16" BORE.......................................... 12" RAM SPEED (Inches/Minute) ADVANCE ............ 17 RAM SPEED (Inches/Minute) PRESSING ........... 4 RAM SPEED (Inches/Minute) RETURN ............. 21 DISTANCE BETWEEN POSTS (RIGHT TO LEFT) ....... 60" DISTANCE BETWEEN POSTS (FRONT TO BACK) ....... 20" MAXIMUM DISTANCE FROM BED TO RAM ............. 31"   BROACHING C-FRAME SPECS: CAPACITY ..................................... 20 TONS STROKE ....................................... 20" BORE ......................................... 4" DAYLITE ...................................... 36.5" MAX. THROAT ....................................... 8" TABLE ........................................ 20" X 13" SPEEDS (Approach) ............................ 150 IPM SPEEDS (Pressing) ............................ 33 IPM SPEEDS (Return) .............................. 250 IPM   OVERALL HEIGHT ................................... 120" OVERALL WIDTH .................................... 116" OVERALL DEPTH .................................... 60" WEIGHT ........................................... 7,500#   MADE IN CANADA - NOT A CHEAP IMPORT   EQUIPPED WITH: - MOVABLE WORKHEAD FOR OFF-CENTER WORK. ALLOWS THE OPERATOR TO POSITION THE CYLINDER FROM LEFT TO RIGHT WITH THE TOUCH OF A LEVER. - 2 SEPARATE PRESSURE REGULATORS FOR C-FRAME AND H-FRAME - BOTH CYLINDER ACTIVATIONS ARE FINGER TIP CONTROLLED, THE MORE THE HAND LEVER IS ENGAGED THE MORE THE RAM MOVEMENT INCREASES, ALLOWING THE OPERATOR TO USE THE PROPER SPEED FOR THE TASK. - 2 SEPERATE PRESSURE GAUGES. - DOUBLE-ACTION PERMITS PULLING AS WELL AS PRESSING RAM ACTION - HYDRAULIC POWER LIFT TABLE - FOR EASY VERTICAL MOVEMENT OF TABLE. - HEAVY DUTY STEEL STRUCTURE - ALL COMPONENTS ARE QUALITY U.S. OR CANADIAN PARTS - TIE RODS WITH SELF LOCKING TABLE - ELIMINATES LATERAL MOVEMENT - OPEN SIDES - FACILITATES WORK ON LONGER PIECES - FLAT RAM NOSE - ALLOWS THE USER TO ADAPT THE PRESS TO A SPECIFIC JOB. - ELECTRIC/HYDRAULIC OPERATION - PROVIDING SMOOTH AND CONSISTENT PRESSING ACTION - BALDOR 10 HP, 3 PHASE, 208/230/460 VOLT LOW SPEED MOTOR - LOW SPEED PUMP - PROVIDES QUIET AND DEPENDABLE OPERATION - 20 GALLON OIL RESERVOIR. - LOW PRESSURE HYDRAULIC SYSTEM - MAINTAINS LOWER OIL TEMPERATURE, RESULTING IN HIGHER EFFICIENCY AND SAFER OPERATION. - ALL HYDRAULIC AND MECHANICAL PARTS ARE STANDARD IN THE INDUSTRY AND READILY AVAIABLE THROUGH OUT NORTH AMERICA. - FULL ONE YEAR WARRANTY.   AVAILABLE OPTIONS: - V-BLOCKS ................................... $1,250 SET - STOP / START & EMERGENCY STOP .............. $900 - FRONT OR BACK SAFETY GUARD ................. $900 EA - SIDE SAFETY GUARD ..............(PER SIDE).. $600 - FOOT PEDAL ................................. $3,400 - ADJ. STROKE CONTROL C/W FOOT PEDAL ......... $5,000 - 24” STROKE CYLINDER ........................ $1,400 - PRESS PLATE ................................ $3,500 - COMPREHENSIVE SAFETY PACKAGE WITH EMERGENCY STOPS AND LEXAN GUARDING ............................... $7,600     FOR MORE INFORMATION: Call Rick at 973-497-7560