PRESSMASTER HFP-250/MWHمكابس H-الإطار

بطاقة الهوية
366495
علامة تجارية
موديل
الموقع
New Jersey
الولايات المتحدة الامريكية
رقم المخزن
154333
الثمن
صور ( 5 )

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على PRESSMASTER HFP-250/MWH ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .

بطاقة الهوية
366495
علامة تجارية
موديل
الموقع
New Jersey
الولايات المتحدة الامريكية
رقم المخزن
154333
الثمن

الوصف

250 Ton 16" Stroke Pressmaster HFP-250/MWH H-FRAME HYDRAULIC PRESS, With Moveable Workhead

المواصفات

تحويل المواصفات للمتري
حمولة
250 T
المشوار
16 "

250 TON PRESSMASTER H-FRAME PRESS

MODEL HFP-250MWH

 

SPECIFICATIONS:

RATED CAPACITY, TONNAGE........................... 250

STROKE............................................ 16"

BORE.............................................. 12"

RAM SPEED (Inches/Minute) ADVANCE ................ 17

RAM SPEED (Inches/Minute) PRESSING ............... 4

RAM SPEED (Inches/Minute) RETURN ................. 21

DISTANCE BETWEEN POSTS (RIGHT TO LEFT)............ 60"

DISTANCE BETWEEN POSTS (FRONT TO BACK)............ 20"

MAXIMUM DISTANCE FROM BED TO RAM ................. 33"

 

OVERALL HEIGHT ................................... 108"

OVERALL WIDTH .................................... 97"

OVERALL DEPTH .................................... 58"

WEIGHT ........................................... 7,600#

 

MADE IN CANADA - NOT A CHEAP IMPORT

 

EQUIPPED WITH:

- MOVABLE WORKHEAD FOR OFF-CENTER WORK. ALLOWS THE OPERATOR TO POSITION

THE CYLINDER FROM LEFT TO RIGHT WITH THE TOUCH OF A LEVER.

- CYLINDER ACTIVATION IS FINGER TIP CONTROLLED, THE MORE THE HAND LEVER

IS ENGAGED THE MORE THE RAM MOVEMENT INCREASES, ALLOWING THE OPERATOR TO

USE THE PROPER SPEED FOR THE TASK.

- DOUBLE-ACTION PERMITS PULLING AS WELL AS PRESSING RAM ACTION

- PRESSURE REGULATOR - TO LIMIT RAM PRESSURE

- HYDRAULIC POWER LIFT TABLE - FOR EASY VERTICAL MOVEMENT OF TABLE.

- HEAVY DUTY STEEL STRUCTURE - ALL COMPONENTS ARE QUALITY U.S. OR CANADIAN PARTS

- TIE RODS WITH SELF LOCKING TABLE - ELIMINATES LATERAL MOVEMENT

- OPEN SIDES - FACILITATES WORK ON LONGER PIECES

- FLAT RAM NOSE - ALLOWS THE USER TO ADAPT THE PRESS TO A SPECIFIC JOB.

- ELECTRIC/HYDRAULIC OPERATION - PROVIDING SMOOTH AND CONSISTENT PRESSING ACTION

- BALDOR 10 HP, 3 PHASE, 208/230/460 VOLT LOW SPEED MOTOR

- LOW SPEED PUMP - PROVIDES QUIET AND DEPENDABLE OPERATION

- 20 GALLON OIL RESERVOIR.

- LOW PRESSURE HYDRAULIC SYSTEM - MAINTAINS LOWER OIL TEMPERATURE,

RESULTING IN HIGHER EFFICIENCY AND SAFER OPERATION.

- ALL HYDRAULIC AND MECHANICAL PARTS ARE STANDARD IN THE INDUSTRY AND

READILY AVAILABLE THROUGHOUT NORTH AMERICA.

- FULL ONE YEAR WARRANTY.

 

OPTION:

- ADJUSTABLE DWELL TIMER WITH AUTO STROKE RETRACT ........ $4,950

- 10 HP 230 VOLTS 1 PHASE 41 AMPS ........................ $ CALL

- SAFETY GUARD ........................................... $1,000

- FOOT PEDAL ............................................. $3,250

- ADJUSTABLE STROKE CONTROL WITH FOOT PEDAL .............. $3,600

 

 

FOR MORE INFORMATION: Call Rick at 973-497-7560

عن البائع

معلومات وجهة نظر الشركة