HOFLER RAPID 1500-Lتجليخ تروس

بطاقة الهوية
373742
علامة تجارية
موديل
حالة
تستخدم - ممتاز
السنة
2007
الموقع
Michigan
الولايات المتحدة الامريكية
عودة السياسة
كما هو
رقم المخزن
129089
129089
صور ( 6 )
بطاقة الهوية
373742
علامة تجارية
موديل
حالة
تستخدم - ممتاز
السنة
2007
الموقع
Michigan
الولايات المتحدة الامريكية
عودة السياسة
كما هو
رقم المخزن
129089

الوصف

Hofler Rapid 1500-L 7 Axis CNC Profile Gear Grinder, Siemens 840D CNC Control, 2006

المواصفات

CNC تحكم
CNC (Siemens 840D CNC Control)

HOFLER RAPID 1500-L 7 AXIS CNC PROFILE GEAR GRINDER
Serial Number: 982
Year: 2007
Siemens 840D CNC Control w/Color CRT
ID Attachment
Tailstock Assembly

Specifications:
Tool Data G3 (Internal Toothing):
Maximum Outside Diameter Of Grinding Wheel - Dressable: 300mm
Minimum Diameter Of Grinding Wheel At The Shoulder - Dressable: 150mm
Grinding Wheel Width: 45mm
Speed Of Grinding Spindle: 0-4187 1/Min.
Dressing Roll Diameter: 200mm
Not Specified Data Are Corresponding With The Values For External Toothing

Machine Data:
Grinding Stroke (With External Toothing): 1500mm
Immersion Depth (With Internal Toothing) G3: 400mm
Grinding Spindle Drive: 14 (24) kW
Table Load: 6000 kg Maximum
Operating Capacity: 50 kVA
Compressed Air Supply:
Pre-Pressure: 6-8 Bar
Consumption: 5 m3/h

Workpiece Data (External Toothing):
Circle Diameter da: 1500mm Maximum
Root Circle Diameter df: 50mm Minimum
Number Of Teeth: Unlimited
Profile Height: 41mm Maximum
Module (Dependent On The Toothing Data): Approx. 1-18mm Min.-Max.
Profile Height Extended: 60mm Maximum
Module (Dependent On The Toothing Data): Approx. 1-25mm Min.-Max.
Profile Height Extended: 80mm Maximum
Module (Dependent On The Toothing Data): Approx. 1-34mm Min.-Max.
Helix Angle Left/Right: 45 Degrees Maximum

Tool Data (External Toothing):
Maximum Outside Diameter Of Grinding Wheel - Dressable: 400mm
Minimum Diameter Of Grinding Wheel At The Shoulder - Dressable: 184mm
Minimum Diameter Of Grinding Wheel At The Shoulder - Dressable (With 24 kW
Grinding Spindle): 204mm
Grinding Wheel Width (Standard): 60mm Maximum
Grinding Wheel Width (Special): > 60-90mm
Speed Of Grinding Spindle: 0-4000 1/Min.
Dressing Roll Diameter (Standard): 160mm
Dressing Roll Diameter (With Extended Profile Height Up To 60mm): 200mm
Dressing Roll Diameter (With Extended Profile Height Up To 80mm): 240mm
Speed Of Dressing Spindle: 0-5400 1/Min.

Workpiece Data G3 (Internal Toothing):
Tip Circle Diameter da: 500mm Minimum
Profile Height: 40mm Maximum
Not Specified Data Are Corresponding With The Values For External Toothing

Working Ranges:
Maximum Workpiece Height Above Workpiece Table: 3100mm
Grinding Stroke: 1500mm
Upper Edge Of Workpiece Table: 300mm

(#129089)

عن البائع

معلومات وجهة نظر الشركة