Work area Swing over bed 720 mm (28.3") Distance between spindle noses 1700 – 2300 mm (66.9 – 90.6") Max. Bore in Draw Tube (A2-8) 95 mm (3.7") Travel Travel in with milling spindle X1 / Z1 550 / 1300 – 1900 mm (21.7 / 51.2 – 74.8") Travel in 2 / Z2 300 / 1340 – 1940 mm (11.8 / 52.8 – 76.4") Y travel in 240 mm (+/- 120 mm) (9.4" (+/- 4.7")) Main and counter spindle (A2-8) Maximum speed 3500 rpm Maximum power 33 kW (44.3 hp) Maximum torque 800 Nm (590 ft/lbs) Main and counter spindle (A2-11) Maximum speed 2500 rpm Maximum power - main spindle 52 kW (69.7 hp) Maximum torque - main spindle 2480 Nm (1828 ft/lbs) Maximum power - counter spindle 42 kW (56.3 hp) Maximum torque - counter spindle 1040 Nm (767 ft/lbs) Tailstock Taper mounting (integrated bearing) MT 5 Travel in 1100 / 1600 mm (43.3 / 63") Quill stroke 150 mm (5.9") Quill diameter 150 mm (5.9") Tool turret top and bottom Number of tool positions 2 x 12 Tool holding shaft in accordance with 40 mm (1.8") VDI (DIN 69880) Driven tools Speed range 0 – 3000 rpm Torque 40 Nm (29.5 ft/lbs) Drive performance 10.5 kW (14 hp) Driven tools 2 x 12 B-axis and PowerMill Travel range 205° Tool magazine positions 40 (80 optional) Tool holder HSK63, C6, C5 Maximum torque 128 Nm (94.4 ft/lbs) Maximum power 21.5 kW (28.8 hp) Maximum speed 7000 (12000) rpm Tool change time (tool - tool) 2.2 sec Feed drives Rapid motion speed X / Z counter spindle 30 m/min (1181 ipm) Rapid traverse speed in Y 15 m/min (590 ipm) Coolant system Tank volume 420 / 520 liters (119 / 137.6 gal) Pump capacity 14 bar / 10 l/min (203 PSI / 2.6 gal/min) Dimensions Height of center above floor 1360 mm (53.6") Overall height 2800 mm (110.2") Space required inclusive tool magazine 8500 / 9100 x 3150 mm (334.6 / 358.3 x 124") Total weight 16000 – 22000 kg (35274 – 48500 lb) Safety devices CE compliant