DAEWOO LYNX 200LCمخارط CNC

بطاقة الهوية
390824
علامة تجارية
موديل
النوع
حالة
مستعملة - جيد
السنة
2000
الموقع
الولايات المتحدة الامريكية

الوصف

2000 Daewoo Lynx 200LC CNC Turning Center With LNS Quickload Servo S2 Barfeed. Machine is in good shape and can be inspected under power. The tailstock is currently disconnected due to a hydraulic leak and the chip conveyor does not function. Options include: parts catcher, tool setter, tailstock, 8" chuck, ATS S26 collet chuck, and LNS Quickload Servo S2 barfeeder. Please contact Kurt Dahlberg at 989-233-9886 with any questions.

المواصفات

تحويل المواصفات للمتري
حجم الظرف
8 "
سعة العامود
2.5 "
أكسات
2
القدرة
15 hp
ماكس RPM
4000 rpm
قطر الخراطة
8.3 "
الأرجحة
20 "
بالقطع طول
21 "
غراب
Yes
الأدوات الحية
No
الفرعية المغزل
No
الأبعاد
101" X 63" X 65"
الوزن
7700 Lbs
CNC تحكم
CNC (Fanuc 21iT)

2000 Daewoo Lynx 200LC CNC Turning Center

Specifications:

Control..........................................................................................................Fanuc 21i-T
Swing Over .......................................................................................................Bed:20.1”
Max Turning Diameter................................................................................................8.3"
Max Turning Length.....................................................................................................21"
Axis Travel.................................................................................................................6.9”
Z Axis Travel.............................................................................................................21.7”
X Axis Rapid Traverse.....................................................................................1181 IPM
Z Axis Rapid Traverse.....................................................................................1417 IPM
Bar Capacity............................................................................................................2.625"
Chuck Capacity.........................................................................................................8.00"
Spindle Nose............................................................................................................A2-6
Spindle Motor........................................................................................................15 HP
Spindle Speeds.........................................................................................40-4,000 RPM
Number of Turret Positions..........................................................................................12
Approximate Dimensions...................................................................101" x 63" x 65"H
Approximate Weight........................................................................................7,700 Lbs

Equipped With:
Parts Catcher
Tool Setter
Tailstock (Disconnected/ Hydraulic Leak)
Chip Conveyor (Non Functioning)
3-Jaw, 8” Chuck
ATS Collet Chuck With Master Collet for S26 Pads
All Manuals
Bar Loader: LNS Quick Load S2

عن البائع

معلومات وجهة نظر الشركة