AMERICAN UNDER FLOOR WHEEL TRUING مخارط عجلة

المواصفات

Revolution Machine Tools
New and Used Machine Tools Experts for 25 Years
We take pleasure in helping our customers succeed!

  Available Immediately - Heavy Duty Underfloor Wheel Truing Lathe

 


 



Pre-owned (284 hours since it was installed new, in 1998) American Underfloor Wheel Truing Machine.

Machine configuration: underfloor pit-mounted dual Spindle milling machine, capable of simultaneously re-profiling both wheels of a railway wheel set using the axle centers as the machining reference point. It is capable of profiling wheel sets to necessary specifications for tape size, concentrically and plane dimensions in any of the following situations: 

1- While the wheel set is under a locomotive, passenger or freight car, transit vehicle, or other rolling stock.
2- While the wheel sets are mounted in a truck. 
3- While the wheel set is demount-ed as a single set.
The Machine will re-profile both wheels simultaneously to equal diameters, leaving a witness groove at the flange of the profile. 
Both wheels of a wheel set will be finished automatically to the diameter that is required to clean up, while removing the minimum amount of metal possible.

Machine Specifications 
 Fabricated Beam Maximum Length	128 in.	3148 mm
 C-Frame Maximum Width	245 in.	6315 mm
 C-Frame Maximum Height	117 in.	2917.8 mm
 Total Weight	45000 lbs.	19143.67 kg
Pit Dimensions 
 Length	325 in.	8574 mm
 Width	315 in.	7947 mm
 Depth	122 in.	3065  mm
General Specifications 
 Production	Up to 10 wheel sets
per 8-hour shift	 
 Diameter Accuracy	+/- 0.020 in.	+/- .5 mm
 Eccentricity	+/- 0.020 in.	+/- .5 mm
 Profile Accuracy	+/- 0.010 in.	+/- .25 mm
 Surface Finish	200 RMS axially,
150 RMS on wheel circumference	 
 Milling Cutter Speed	30 RPM	 
 Hydraulic Centering Ram Force	6500 lbs.	2.9 kN
 Hydraulic Hold-Down Force	15 tons	133 kN
Utility Requirements 
 Electrical Power	76 kW	 
 Hydraulic Reservoir	90 US gallons	340.69 liters
Wheel Set Dimensions 
 Maximum Wheel Diameter	58 in.	1475 mm
 Minimum Wheel Diameter	23 in.	585 mm
 Maximum Axle Load	50 tons  	445 kN

Specifications subject to verification 


Contact   Kyle Jorgenson - 
Cell: 385-321-3934
Email:kyle@rmtus.com
 Web:www.RMTUS.com 

Revolution Machine Tools
Our experienced service & application specialists are the best in the world, standing by to help install, perform on-sight training, maintenance and repair of your equipment.
We can carefully load all machines and arrange transportation if necessary.
  If you have a need for this machine, please contact us. This type of machine does not come along very often. Especially in this condition.