طباعة هذه الصفحة

AXELSON 20 حقل نفط ومخارط المغزل الجوف

معلومات القوائم

بطاقة الهوية
403249
رقم المخزن
Ref.#L4106717
علامة تجارية
AXELSON
موديل
20
النوع
حقل نفط ومخارط المغزل الجوف
رقم المسلسل
4727
حالة
مستعملة - جيد
عودة السياسة
30 يوم
الموقع
Texas
الولايات المتحدة الامريكية
الوصف
27" X 226" Used Axelson Hollow Spindle Engine Lathe Ref.#L4106717 Model: A-20 Serial No. 4727 New: 1954 Swing Over Bed Ways....27-5/8" Swing Over Cross Slide....19-1/2" Center Distance....226" Spindle Hole....8-5/8" Spindle Speeds....6 To 500 Rpm's Chuck Size W/8-5/8"Hole Front (1) Piece Jaws ....20" 4-Jaw Chuck Size W/8-5/8" Hole Rear (1) Piece Jaws ....20" 4-Jaw Feeds.....003 To .185 I.P.R. Threads Inch....1-1/2" T 92 TPI Threads Metric....No Tail Stock Quill Diameter....4-1/2" Tail Stock Quill Travel....10" Tail Stock Taper....# 5 Morse Main Motor....20 Hp. 440/220/3 Weight....24,000 Lbs. Floor Space Length / Width....27'5" X 65" Height....72" Steady Rest Roller Type.....11-1/2" Steady Rest Roller Type....7-1/2" Chip Pan And Coolant Pump....Yes Taper Attachment....Yes Thread Dial.....Yes Hardened And Ground Ways....Yes Factory Raised In The Sand 3....Yes Note: Machine Has Been Cleaned, Painted & Cycled. Condition Very Good

المواصفات

الأرجحة
27.625"
المراكز
226"
ثقب عامود الدوران
8.625"
القدرة
20 hp
RPM
500 RPM
الأبعاد
65" W X 27'5" L X 72" H
الوزن
24,000Lbs.
27" X 226" Used Axelson Hollow Spindle Engine Lathe    Ref.#L4106717
Model: A-20
Serial No. 4727     
New: 1954

Swing Over Bed Ways....27-5/8"
Swing Over Cross Slide....19-1/2"
Center Distance....226"
Spindle Hole....8-5/8"
Spindle Speeds....6 To 500 Rpm's
Chuck Size W/8-5/8"Hole Front (1) Piece Jaws	....20" 4-Jaw
Chuck Size W/8-5/8" Hole Rear (1) Piece Jaws	....20" 4-Jaw
Feeds.....003 To .185 I.P.R.
Threads Inch....1-1/2" T 92 TPI
Threads Metric....No
Tail Stock Quill Diameter....4-1/2"
Tail Stock Quill Travel....10"
Tail Stock Taper....# 5 Morse
Main Motor....20 Hp. 440/220/3
Weight....24,000 Lbs.
Floor Space Length / Width....27'5" X 65"
Height....72"
Steady Rest Roller Type.....11-1/2"
Steady Rest Roller Type....7-1/2"
Chip Pan And Coolant Pump....Yes
Taper Attachment....Yes
Thread Dial.....Yes
Hardened And Ground Ways....Yes
Factory Raised In The Sand 3....Yes

Note: Machine Has Been Cleaned, Painted & Cycled.	
	
Condition	Very Good