راقب

القواطع والعتاد GasherGOULD & EBERHARDT 60S-2

الولايات المتحدة الامريكية

نظرة عامة

علامة تجارية
موديل
بطاقة الهوية
404229
السنة
2017
الموقع
الولايات المتحدة الامريكية
رقم المخزن
3990
الوصف
Gould & Eberhardt 60 S-2 CNC Gear Gasher, 60" Diameter cap, 1 DP, Machine to be retrofitted with Fanuc or Siemens Controls.
المواصفات

ورقة المواصفات

The Gould & Eberhardt #60-S2 is suitable for the high-speed cutting/gashing of spur gears, sprockets, pinions, and other workpieces of similar profile up to 60" in diameter, utilizing formed high speed steel or carbide tipped disc-type cutters up to 18" diameter. Machine Specifications: External Gears with Gashing Cutter Head Gashing * Max. Gear Diameter w/support..........................................40" * Max. Gear Diameter w/o support........................................60'' * Min Gear Diameter....................................................1.5" * Max. Face Width.....................................................38.5'' * Max. Shift or Tangential Slide.........................................0" * Max. DP............................................................1 NDP * Max. Cutter Diameter x Width.....................................18" x 4" * Diameter of work table................................................34" * Bore diameter of work table...........................................10" * Max Table Load................................................20,000 Lbs. * Pitch Diameter of index gear..........................................28'' * Index range, number of teeth.........................Infinitely Variable * Machine height...................................................15-feet * Weight of machine, Approx........................................20 tons * Floor Space Required.............................20 ft. by 12 ft. approx. Hydraulic Tailstock Work Ranges: * Max Height From Table Surface.........................................34" * Min Height from Table Surface..........................................8" Heights can be adjusted based on customer part dimensions Tailstock Features: * Manual Retract * Hydraulic Positioning via M code in Manual or Automatic mode * Hydraulic Swing Away * Dead or Live Center Standard Equipment: * Single stanchion machine assembly with external cutting head * Fanuc Or Siemens 3-axis control with gear cutting software * Oil re-circulation system with filtration for cutting head * Hydraulic Oil Chilling System * Gashing Arbor * Chip Conveyor (Optional $ 15,000.00) * Tailstock * Half Cabin Enclosure * 500lb Jib Crane (Optional $ 7,500.00) * Set of Leveling Blocks * Machine Painted to Customer's Specifications (2 Colors). * Standard safety guarding and warning labels. * 2- sets documentation (hydraulic, electrical, and operator) Control Features: * C-Axis work table rotation * X-Axis radial infeed * Z-Axis axial feed * A-Axis cutter rotation * Custom Macro screens for easy conversational programming * One to 3 cuts can be selected * Crowning amounts are input by the desired amount on the flank of the gear * Single index Milling * Control of separate entering and exiting feed rates to optimize cycle times and cutting loads * Selection of tailstock functions via m code * Programmable taper cutting * Sizing cycle feature used to make corrections to the size of a part without running through a complete multi cut cycle * Part programs can be stored in nonvolatile memory with up to 15 characters * RS-232, S Ram, and Ethernet communication ports. (S Ram card included) Machine Design Features: * Base and Column are cast Iron construction with new design improvements to maximize stiffness. * All slide ways are hardened and ground to precision standards for accurate dependable motion and long life. * All Axes are digitally driven with separate servo drives and absolute value encoders providing precision location at all times. * Axis ball screw are 80mm by 10mm pitch. * The work table is designed for maximum stiffness with hydrostatic bearing surfaces supporting the work piece loads. Table rotation powered by a separate servo drive system utilizing a worm gear design. Table position is maintained with an absolute value encoder. * The slide ways and all other lubrication points, with exception of the cutter heads, are lubricated by an automated forced pressure lubrication system. * The lubrication reservoir is designed for visual observation and also has an alarm system to assure maintenance of the lubrication levels. * The cutter head is lubricated with a re-circulating oil bath. The oil bath recirculation system is a free standing above floor system servicing only the cutter heads. The re-circulation system includes filtration and oil temperature control for consistent predictable performance and long life of the cutter head gear drives. * Self contained hydraulic system for hydraulic counter balancing of the cutter saddle, and table braking. GENERAL TERMS AND CONDITIONS: Delivery: Will Advise Transportation: TBD * CIF quotes available upon request Runoff Criteria: TBD Installation and Training: * This price includes the services of a factory service engineer to assist customer in set-up of machine in the US only. International installation will be quoted at additional cost. The customer is responsible for machine foundation, rigging machine in place and supplies all hook ups to power, air, and water. The factory service engineer completes installation with customer supplied assistance. The factory service engineer completes demonstration of the machine run-off, capabilities and operator instruction for a period of not to exceed 3 working days. Extended service is available at our normal service rates in effect at the time of installation. Warranty: * One (1) Year Service Warranty * Fanuc AND/OR Siemens Controls, motors, and drives are supported with a two (1)year Mfg. part warranty * This quotation is valid for 30 days and subject to availability Payment: 50% down payment with Purchase Order 40% Upon successful runoff at Piselli Enterprises 10% Net 30 days from Receipt of Machine
عن البائع

رؤية المزيد من العقارات المعروضة من هذا النوع

thumb

GOULD & EBERHARDT 120/8000-GH DEMO

القواطع والعتاد Gasher

2010 | الولايات المتحدة الامريكية
thumb

GOULD & EBERHARDT 96-G REMAN

القواطع والعتاد Gasher

2019 | الولايات المتحدة الامريكية
thumb

GOULD & EBERHARDT 120-G

القواطع والعتاد Gasher

تستخدم - ممتاز | 2009 | الولايات المتحدة الامريكية
thumb

GOULD & EBERHARDT 96-GH GASHER

القواطع والعتاد Gasher

2009 | North Carolina, الولايات المتحدة الامريكية

رؤية المزيد من العقارات المعروضة لهذه العلامة التجارية

thumb

GOULD & EBERHARDT 36HS

هوبر تروس

Ohio, الولايات المتحدة الامريكية
thumb

GOULD & EBERHARDT

هوبر تروس

Ohio, الولايات المتحدة الامريكية
thumb

GOULD & EBERHARDT 96H

هوبر تروس

الولايات المتحدة الامريكية
thumb

GOULD & EBERHARDT 120 TWG

هوبر تروس

North Carolina, الولايات المتحدة الامريكية
عرض جميع