CINCINNATI MILACRON 220-8المطاحن الامركزية

بطاقة الهوية
404395
علامة تجارية
موديل
رقم المسلسل
3503000082-0005
الموقع
North Carolina
الولايات المتحدة الامريكية
رقم المخزن
5712
الثمن
Bg 5712
صور ( 5 )
بطاقة الهوية
404395
علامة تجارية
موديل
رقم المسلسل
3503000082-0005
الموقع
North Carolina
الولايات المتحدة الامريكية
رقم المخزن
5712
الثمن

الوصف

Automatic Cycling, Electro-Hydraulic Infeed with Course and Fine Infeeds, Variable Stock Removal Rates, Infeed Handwheel Graduated in Five Ten Thousandths of an Inch. Hydraulic Grinding Wheel Profile Diamond Truing and Hydraulic Regulating Wheel Profile Diamond Truing Units. Infinitely Variable Regulating Wheel Speeds. Infinitely Variable Feed Rates. Swivel Headstock, Regulating Wheelhead Tachometer. Load Meter, and Rear Mounted Electrical Control Cabinet . Operators Manual.

المواصفات

تحويل المواصفات للمتري
سعة الشغل
4.75 "
قطر عجلة التجليخ
24 "
طاقة عجلة التجليخ
20 hp
دوران عجلة التجليخ RPM
1800 rpm
قطر عجلة التنظيم
12 "
قدرة RW
1.5 hp
RW RPM
1200 rpm
الوزن
12,500 lbs.

Cincinnati Milacron 220-8 Centramic Centerless Grinder Automatic Cycling Variable Feed Rates Swivel Headstock.

Stock No. 5712
Serial #: 3503000082-0005
Location: Lincolnton, NC.

Machine Capacity 0.063-3.000" w/Std. Thrufeed
Max. Work Diameter 4.750"
Min. Diameter Wheelhead 17"
Max. Diameter Wheelhead 24"
Collet Hole Diameter 12"
Grinding Wheel Width 3-8" Max. 10"
Grinding Wheel Speed 6500 ft/min.
Motor 20-HP / 1800 RPM
New Regulating Wheel 12"
Used Regulating Wheel 10"
I.D. Regulating Wheel 5"
No. Regulating Wheel Speeds Infinite
Low Wheel Speeds 15-56 RPM
High Wheel Speeds 56-300 RPM
Regulating Wheel Motor 1-1/2HP @ 1200 RPM
Max. Lower Side Travel 6.375"
Max. Upper Side Travel 2.875"
Hydraulic Reservoir 21 Gal.
Automatic Feed Lubrication 3 Gal.
Approx. Weight 12,500 lbs.

Equipped With:
Automatic Cycling, Electro-Hydraulic Infeed with Course and Fine Infeeds, Variable Stock Removal Rates, Infeed Handwheel Graduated in Five Ten Thousandths of an Inch. Hydraulic Grinding Wheel Profile Diamond Truing and Hydraulic Regulating Wheel Profile Diamond Truing Units. Infinitely Variable Regulating Wheel Speeds. Infinitely Variable Feed Rates. Swivel Headstock, Regulating Wheelhead Tachometer. Load Meter, and Rear Mounted Electrical Control Cabinet . Operators Manual.

Price ……………………………………………… $35,000.00

PLEASE SEE TERMS AND CONDITIONS BELOW
TERMS AND CONDITIONS OF SALES
Unless otherwise arranged, 10% cash (non-refundable) with order, balance prior to shipment of machine. Title does not pass until machine has been paid for in full. There are no warranties by ACT Machinery as to compliance with any requirements of Federal, State and Local laws and industrial codes, including, without limitation, the Occupational Safety and Health Act of 1970 and all amendments thereto. It is the buyer’s duty to inspect all machinery, to provide proper safety devices and equipment or means that may be necessary to safeguard the operator from harm and to safeguard each machine and equipment to meet all government standards, including the Occupational Safety and Health Act of 1970. Specifications are approximate, not binding and meant as a guide only. We reserve the right to correct typographical errors. It is the purchaser’s responsibility to verify specifications and dimensions. All machines offered subject to prior sale and for acceptance within ten days from date of quotation. Prices subject to change without notice. Orders are not subject to cancellation except by written mutual consent. All equipment sold “AS IS” with no guarantees expressed or implied. It is further understood and agreed this buyer or subsequent buyers will hold vendor harmless for causes of action whatsoever. This agreement constitutes the entire contract of sale of the goods named herein. No modification of this contract shall be binding upon Seller unless in writing and signed by an authorized officer of Seller.

عن البائع

معلومات وجهة نظر الشركة