AMADA LC-2012C1NTالليزر كومبو اللكمات
22 TOM AMADA LC2012 C1NT SERVO DRIVEN LASER/TURRET COMBINATION
MACHINE W/MP2512C1 LOAD/UNLOADER
MFG:2013 APPROX: 36,588 HOURS - NEW TURBO BLOWER(24k) @ 24,000 HOURS
The laser portion of the C1 features the AMADA/Fanuc AF2000i-B LU2.5 resonator
with 2.5 kilowatts of cutting power. The laser head moves in the Y-axis via a
direct drive servo mechanism for maximum speed and accuracy, and is isolated
from punching vibration to help maintain beam integrity and cut quality. A
cartridge-type lens assures simple and fast lens changes when required. The
resonator is located on a frame designed to reduce floor space requirements
and to provide isolation from punching vibration.
The punching portion of the C1 is based upon the highly successful AC-series
of 22-ton servo drive turret punch presses. The servo drive not only offers
punching speeds of up to 370 hpm on 1" centers, but is also more efficient
than hydraulic punch drives, requiring no pump or chiller.
To maximize punching productivity in conjunction with laser cutting, the C1
features the new 45-station MPT Multi-Purpose Turret. Two of the unique
features of the MPT turret include four tapping tool stations (English and
metric thread tools available) and three powered die lift stations to
facilitate upward forms while reducing material scratches and preventing
downward forms from hitting the forming dies during sheet movements.
The C1 is equipped with a versatile brush table that provides a number of
features to increase productivity and part quality. The brushes help reduce
material scratching, while limiting punching noise. Pop-up urethane rollers
help reduce brush wear during the laser processing of thick materials. Special
high-temperature brush material is installed in the laser cutting area (Y-
axis), and a large 15-3/4" x 50" work chute helps ensure the easy removal of
finished parts and scrap. A lifting brush table section helps to remove
downward forms from the die before the next sheet moves into place. An
automatic sheet loading feature simply requires the operator (in manually
loaded applications) to place the sheet within approximately 2" of the X-Y
gauge blocks, and activate the automatic loading mechanism. This provides
accurate material placement against the gauge blocks and activates the
pneumatic work clamps. With its full 4' x 8' sheet capacity in up to 1/4"
thick material, the C1 achieves better material utilization ratios, especially
Designed with a small footprint to reduce the amount of floor space required,
the C1 is available in both stand-alone (manual load and unload) and
fully automated versions. The automated version is equipped with three newly-
designed components; a sheet load/unloader, a part remover, and a programmable
conveyor for finished parts. The MP-C1 sheet loader/unloader can unload a
sheet of tabbed parts (or scrap) and load a new sheet in approximately 45
seconds, which helps to greatly streamline this portion of the production
process. The PR-C1 part removal system is mounted on the machine frame to help
maintain the small footprint of the C1, and will automatically remove parts
ranging from as small as 4" x 2" to as large as 20" x 20" and weighing up to
26.5 pounds. Once picked from the sheet, the PR-C1 places the parts on an
included 177" long conveyor with multiple feed and stacking options.
MP 2512 C1
The optional MP 2512 C1 automatic sheet loader maintains high levels of
productivity by eliminating operator intervention during the loading process.
The compact design takes up a minimal amount of valuable floor space.
Integration with the LC C1 controller reduces setup time and provides simple,
Max. sheet size w/o reposition: 79" x 50"
Amada/Fanuc laser resoxnator model: AF2000i-B LU2.5
Max. sheet weight: 110 lbs. (F1) 330 lbs. (F4)
Max. material thickness: 0.25"
Max. continuous laser output: 2.5kW
Tap applications: Mild steel, stainless steel and aluminum
Punch servo drive: AC servo
Press tonnage: 22 tons
Turret capacity: 45 station (1) AI + (4) tapping stations (MPT turret)
Max. hit rate: X Axis 370 hpm - Y Axis 275 hpm
(on 1" pitch at 0.118" stroke) for punching pattern
900 hpm (at 0.019" pitch and 0.055" stroke) for marking pattern
Work chute size (X/Y): 15.75" x 50"
Max. table feed rate (X/Y): 3,150 ipm x 2,362 ipm
Positioning accuracy during combination process: 0.0027"
Approx. floor space requirement: 226 sq. ft.
Power requirements: 69Kva
Machine weight: 15.5 tons
Max. part size (X/Y): 20" x 20"
Min. part size (X/Y): 3.92" x 2"
Pneumatic supply: Vacuum pads
Number of vacuum pads: 51
Max. weight: 26.5 lbs.