CINCINNATI INCالمطاحن لفة

بطاقة الهوية
405091
علامة تجارية
حالة
تستخدم - تمت إعادة تشكيلها
رقم المسلسل
7P7J1T-1
الموقع
Illinois
الولايات المتحدة الامريكية
عودة السياسة
عام واحد
رقم المخزن
M-4793
بطاقة الهوية
405091
علامة تجارية
حالة
تستخدم - تمت إعادة تشكيلها
رقم المسلسل
7P7J1T-1
الموقع
Illinois
الولايات المتحدة الامريكية
عودة السياسة
عام واحد
رقم المخزن
M-4793

المواصفات

تحويل المواصفات للمتري
الأرجحة
24 "
المراكز
120 "
قطر عجلة التجليخ
30 "
عرض عجلة التجليخ
4 "
قدرة العجلة
25 hp
سرعة العجلة
1,200 RPM

SCOPE OF WORK:

PART 1: Mechanically recondition machine to restore reliability, new spindle and headstock belts, new Hydraulic hoses, reset geometry of center line. Remove spindle and tailstock Quill confirm fits. Scrape bed ways, hand scrap table and wheel slide.

PART 2: Electrically upgrade the machine with all new electrical wiring and components throughout. The new Servotronic control will have Abbott’s new 12” touch screen. New spindle, headstock motors, new servo motors for all Axis drives, new drives.

RECONDITION CINCINNATI GRINDER
With AMC VersaGrind

Capacity 24” X 120” Serial# 7P7J1Y-1 Stock# M-4793

Specifications:

Maximum diameter of rolls to be ground 24”
Rated distance between centers 120”

Wheelhead:

Maximum Wheel Size 30” X 4” X 12”
Belt Size 23/4” X 160”
Grinding wheel speeds 200 -1200 Variable
Grinding wheel motor 25hp AC Vector
Grinding wheel Drive AC Vector

Workhead:

Workhead Type Dead
Workhead speed 0 - 100 RPM
Workhead motor 20hp AC Vector
Workhead drive AC Vector
Workhead center #15 Brown & Sharpe

Infeed:

Wheelhead infeed motor AC Digital Servo


Grinding Carriage (Table):

Type 2 Piece Swivel
Traverse motor AC Digital Servo
Traverse speeds 0 - 120 IPM

Footstock:

Footstock type Lever
Footstock Center #15 Brown & Sharpe

Power Requirements:

Base machine as described herein 480/3/60, approx. 125amp

Control Specifications: Abbott Servotronic

Baldor ESB PLC
Least Input Increment of 0.00010”
Manual Pulse Generator
Programmable feeds and speed
End infeed, either end or both ends
End Dwell (Tarry) Programmable
RPM Readout of Wheel and Work Speeds
IPM display of table traverse

Scope of Supply:

1 Machine Bed Complete
1 Machine Carriage Complete
1 AMC VersaGrind
1 Headstock Complete
1 Tailstock, Manual, Complete
1 Wheelhead Assembly and applicable guarding, Complete
1 New Electrical System as Described
1 Spindle Lubrication and table way lubrication system, reconditioned
1 Infeed Lubrication system Reconditioned
1 Wheel Loader
1 Pr. Journal Rest
Steel Telescoping Way Covers
Coolant Splash Guards
Fagor Feedback Scales Infeed Slide only

Warranty Statement and Hidden Defects:

Warranty period - 1 year / 2000 hours on all components remanufactured or replaced
by Abbott Machine Co. All warranty claims must be presented to Abbott. All repairs
must be made by an Abbott personnel unless prior written authorization for another
source of repair has been obtained from Abbott. This warranty does not cover repairs
required as a result of misuse, abuse, lack of proper maintenance and or housekeeping,
improper operation of the machine, or improper loading or unloading of parts.

عن البائع

معلومات وجهة نظر الشركة