ELDORADO/MIROKU MEG-300-2 CNCبندقية المثاقب

بطاقة الهوية
405134
علامة تجارية
موديل
الموقع
Illinois
الولايات المتحدة الامريكية
رقم المخزن
39801

الوصف

1" x 32" Eldorado-Miroku MEG-300-2 CNC, 2-Spdl, 3-Axis, Fanuc OM-A, Adj. Knee,92

المواصفات

تحويل المواصفات للمتري
أقصى قطر للثقب
1 "
أقصى عمق للثقب
32 "
عامود الدوران#
2
CNC تحكم
CNC (FANUC OM-A)

Serial No. M-5298
New - 1992
CAPACITY:
Spindles - Number..............................................2
Capacity - Drilling............................0.156-1.00 inches
Stroke - Spindle (Z Axis)............................32.0 inches
Depth - Drilling with Whip Guide.....................16.0 inches
Spindle Motor - Standard....................................3 HP
Speeds - Spindle..................................800 - 7200 RPM
(By Mechanical Variable Speed Drive)
Feed - Spindle...................................0.1 - 20 I.P.M.
Area - Table......................................16 X 32 inches
Table Travel (X Axis)..................................13 inches
Table Travel (Y Axis)..................................12 inches
Table Load Capacity - Maximum..........................1100 Lbs.
Weight - Machine & Coolant System........9900 Lbs. Approximately
Floor Space Required for Installation............152 X 83 inches
SYSTEM DESCRIPTION:
FEED SYSTEM:
Equipped with FANUC OM-A control. Coupled to a precision ground ball screw.
CNC CONTROL - FANUC OM-A
Three Axis..............................................(X,Y,Z)
Two Simultaneously Controllable Axis....................(X & Y)
Decimal Point Programming
Increment System:........................................0.01mm
Tape Code:.........................................E1A RS-244-A
Programmable Dimensions - Maximum...........( + or - 6 Digits )
Rapid Traverse Rate............................X - 1000 mm/min.
Y - 1000 mm/min.
Z - 3000 mm/min.
Inch/Metric Conversion
Combined Use of Absolute/Incremental Programming In the Same Block of Tape.
Pulse Generator - Manual
Dwell: CRT Character Display
Single Block Operation
Optional Block Skip
External Mirror Image
Dry Run
Machine Lock
Emergency Stop
Sequence Number Search
Program Number Search
Feed Hold
Servo Motor: Fanuc DC Servo Motor
Feed Back: Pulse Encoder
Reference Point Return: Manual, Automatic
External Deceleration
Manual Pulse Generator
Canned Cycle
Custom Macro
LUBRICATION:
Air/Oil Positive Lubrication of Sprindle Provided.
CONSTRUCTION:
Knee, base and table are designed and built from high quality cast iron,
stress relieved for stability.
Way base is hardened and ground.
STANDARD EQUIPMENT:
Spindle Load Monitor
Magnetic Separator
Whip Guide
Overflow Preventing Device
Air/Oil Spindle Lubrication System
Pneumatic Power Bushing System
Automatic Slide Ways Lubrication System
Complete Operator Instruction and Maintenance Manuals
SPINDLE:
Equipped with a 9:1 Ratio Mechanical Variable Speed Drive.
Standard Spindle RPM's 800 - 7200 RPM
OPTIONAL EQUIPMENT:
Automatic Oil Receiver for Through Holes
RS232C Tape Interface Option
OPTIONAL SPECIFICATIONS:
Tool Length Compensation
Spindle Function: S2/S4 AC Spindle Motor Keep
Tape Punch Interface: RS232C, FAC, T4070 or ASR 43/33
Inch/Metric Conversion Switchable by G Codes
Stored Stroke Limit
Part Program Storage and Editing: 40/80/320 mm
ISO Code Input: ISO 840 (Automatic Recognition of E1A/150)
*Preliminary Specifications Subject to Verification.

عن البائع

معلومات وجهة نظر الشركة