MADE IN PFRONTEN, GERMANY.
TRAVERSE RANGE X : 30.71"
TRAVERSE RANGE Y : 22.05"
TRAVERSE RANGE Z : 22.05"
MAX WORKPIECE DIMENSIONS 23.62", 22.64"HEIGHT, 882 LBS
ROTARY PALLET CHANGER WITH INTEGRATED NC ROTARY TABLE (C-AXIS)
NC ROTARY TABLE WITH DIRECT MEASURING SYSTEM
ROTATION RANGE: 360 X 0.001 DEGREE (FULL 4TH AXIS)
CLAMPING SURFACE: 19.7" X 24.8" (500 MM X 630 MM)
NUMBER OF PALLETS: 2
MAXIMUM TABLE LOAD: 880 LBS
SWIVEL RANGE: 150 DEGREES (-120/+30 DEGREES)
DUE TO THE SWIVEL RANGE OF 30 DEGREES ACROSS THE HORIZONTAL OR VERTICAL AXIS.THIS GIVES YOU ADVANCED FLEXIBILITY FOR COMPLEX PARTS LIKE IMPELLERS.

-INTEGRATED MOTOR SPINDLE-
POWER 40% ED: 37.55 HP (28 KW)
POWER 100% ED: 25.5 HP (19 KW)
SPINDLE SPEED RANGE: 12,000 RPM
SPINDLE TAPER: CAT40

FEED RATE X/Y/Z: 590 IPM (15 M/MIN)
RAPID FEED RATE X/Y/Z: 1,968 IPM (50 M/MIN)

-60 POSITION VERTICAL CHAIN AUTOMATIC TOOL CHANGER-
MAXIMUM TOOL WEIGHT: 17.64 LBS (8 KG)
MAXIMUM TOOL DIAMETER WITHOUT FREE POCKETS: 3.15" (80 MM)
MAXIMUM TOOL DIAMETER WITH FREE POCKETS: 6.3" (160 MM)
MAXIMUM TOOL LENGTH: 12.4" (315 MM)
TOOL CHANGE TIME APPROXIMATELY 0.8 SECONDS, DOUBLE GRIPPER TOOL CHANGER
CHIP-TO-CHIP TIME APPROXIMATELY 4 SECONDS VERTICAL, 10 SECONDS HORIZONTAL

OPERATION VOLTAGE: 400 V INPUT (COMES WITH MULTI INPUT TRANSFORMER)
CONTROL VOLTAGE: 24 V
MAX AT 100% DUTY CYCLE: 100 A
POWER CONSUMPTION AT 100% DUTY CYCLE: 64 KVA
RECOMMENDED NET PROTECTION: 100 A
RECOMMENDED SHORT CIRCUIT: 3.6 MVA
COMPRESSED AIR REQUIRED: 87 PSI (6 BAR)
TOTAL WEIGHT WITH PALLET CHANGER: APPROXIMATELY 22,000 LBS (9 TONS)
3-POINT SUPPORT WITH 3 LEVELING SHOES, NO SPECIAL FOUNDATION REQUIRED

-ITEMS TO SHIP-
1/4: DMG DMC60T: APPROX 152" L X 134" W X 100" H, 22,000 LBS
2/4: COOLANT TANK: APPROX 90" L X 56" W X 66" H, 1,500 LBS
3/4: CHIP CONVEYOR: APPROX 127" L X 27" W X 77" H, 1,000 LBS
4/4: TRANSFORMER ON SKID: APPROX 48" SQUARE, 500 LBS
100MM DISTANCE T-SLOT PALLETS
HEIDENHAIN ITNC530 CNC CONTROL WITH HR410 ELECTRONIC HANDWHEEL
BLUM LASER TOOL LENGTH AND DIAMETER MEASURING, HORIZONTAL/VERTICAL
COOLANT THRU-SPINDLE 580 PSI
AUTOMATIC PAPER FILTER CLEANING WITH FINE FILTERING OF THE COMPLETE
CHIP CONVEYOR
AIR BLAST THROUGH SPINDLE CENTRE, SELECTED WITH M-FUNCTION
SPRAY PISTOL WITH PUMP
MULTI INPUT TRANSFORMER
HEIDENHAIN GLASS SCALES DIRECT MEASURING SYSTEM X/Y/Z AXES
HEIDENHAIN ROTARY ENCODERS DIRECT MEASURING SYSTEM B/C AXES
EXTERNAL COOLANT NOZZLES ON OUTSIDE OF SPINDLE AIR/COOLANT SELECTABLE
AUTOMATIC SWITCH-OFF OF POSITIVE AIR PRESSURE FOR THE MAIN SPINDLE AFTER WORK END
LINEAR ROLLER GUIDEWAYS AND DIGITAL DRIVES. STABILITY AND HIGH PRECISION ARE ENSURED WITH ROLLER GUIDEWAYS WITH OVER-DIMENSIONED DISTANCES BETWEEN THE GUIDEWAYS. THE TABLE CENTRE OF GRAVITY MOVES IN BETWEEN THE VERTICAL GUIDEWAYS (Z-AXIS).
ELECTRONIC TEMPERATURE COMPENSATION
SPINDLE CHILLER
MANUALS AND CD
FULL ENCLOSURE OF MACHINING AREA FOR SAFETY AND NOISE REDUCTION
SENSITIVE MACHINE PARTS (MEASURING SYSTEMS, LIMIT SWITCHES, GUIDE-WAYS, DRIVES) ARE SEPARATE FROM THE MACHINING AREA
AUTOMATIC PALLET CHANGER.