MIYANO TSV-33مراكز التخريم و القلوزة

بطاقة الهوية
406060
علامة تجارية
موديل
حالة
مستعملة - جيد
السنة
1994
الموقع
Illinois
الولايات المتحدة الامريكية

الوصف

1994 Miyano TSV-33 CNC Drill and Tap Machine. Machine runs well and is available for immediate inspection. Machine comes with Fanuc series OM control, rigid tap, and coolant system. Please contact: Bob Nelson at 847-921-3845, Brian Foerster at 847-800-4494, or Cris Mulvihill at 602-501-8995 with any and all questions.

المواصفات

تحويل المواصفات للمتري
X
11.75 "
Y
8.625 "
Z
9 "
القدرة
5 hp
RPM
8000 rpm
# ATC
12
انحناء
BT30
الأبعاد
60" x 77" x 95"
الوزن
5000 (LBS)
CNC تحكم
CNC (FANUC OM)

1994 Miyano TSV-33
Drill Tap CNC Machine

Specifications:
Table Size………………………………………………………….8.66"x19.68"
X Axis Travel…………………………………………………………….11.75”
Y Axis Travel…………………………………………………………….8.625”
Z Axis Travel……………………………..…………………………………..9”
Spindle Tapper……………………………………………………………BT30
Spindle Speed………………………………………………………8,000RPM
Total Hp……………………………………………………………………./16
Main Motor………………………………………………………….1.5 / 5 HP
Cycles……………………………………………………………………60Hz
Tool Holders…………………………………………………………...ATC 12
Voltage…………………………………………………………..230V/3-Phase
Control ………………………………………………………Fanuc Series O-M
Dimensions…………………………………………………….49” X 72” X 90”
Weight…………………………………………………Approximately 5,000lbs

Equipped With:
Fanuc Series O-M Control
Full Enclosure
Rigid Tapping
Coolant System
***Indexer In Photo Not Included

عن البائع

معلومات وجهة نظر الشركة