EMPIRE PRO-FINISH 4848تنظيف بالعصف

بطاقة الهوية
406728
علامة تجارية
موديل
حالة
تستخدم - ممتاز
السنة
2015
الموقع
Wisconsin
الولايات المتحدة الامريكية
رقم المخزن
js
Img 6790
صور ( 6 )

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على EMPIRE PRO-FINISH 4848 ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .

بطاقة الهوية
406728
علامة تجارية
موديل
حالة
تستخدم - ممتاز
السنة
2015
الموقع
Wisconsin
الولايات المتحدة الامريكية
رقم المخزن
js

الوصف

This machine is in like-new condition, was purchased but barely used. This machine is under-power and available for immediate sale and delivery. Please call James at Mac-Tech for information.

المواصفات

تحويل المواصفات للمتري
عرض الغرفة
48 "
غرفة-D
48 "
ارتفاع الغرفة
36 "

Modified Pro-Finish 4848 Suction System, Includes:
* 48" deep x 48" wide 36" high #14 gauge cabinet

• Vestibules in place of both the right and left side swing doors. 41" deep x 33" high and extending from the sides of the cabinet with media return duct under each vestibule for media recovery/conveying. Black rubber curtains at both the entrance and exit vestibules, NO doors.
* Front access swing door 41" wide x 32" high with 14" high x 22" wide viewing window and electric door interlock.
• 24" Wide x 120" long conveyor, Ultrawear belt, variable speed 1 to 10 ft per minute. Part movement left to right thru the cabinet and vestibules.
• 24" Stroke pneumatic oscillator, horizontal motion, mounted on the rear wall of the cabinet, manually adjustable stroke length and speed. (6) Gun holding brackets attached to the oscillating arm and support wheels under the oscillation rods.
* 1200 CFM externally tunable reclaimer

* CDC-12 Dust collector, cartridge, with manual pulse jet cleaning of the filters.
* Suction blast system: 4 cubic foot suction hopper, (6) MH-3 guns with 5/16" boron nozzles
• (7) Fixed blow off nozzles located in the right side/exit vestibule
• Control package: Includes selector switches for the on/off of the dust collector, lights, blast and blow off. A timer will control the belt motion, oscillation and blast of all (6) guns. Separate pushbuttons for belt "jog", cycle start and cycle stop. The electrical enclosure approximately 24" x 24" will be located on the front of the left side vestibule.
* Electrical Requirements: 460 volt, 60 hz, three-phase


Notes:
1. NO manual blasting can be performed in this system
2. Load height of the conveyor is approximately 42" from the factory floor.

عن البائع

معلومات وجهة نظر الشركة