L & L A42حقل نفط ومخارط المغزل الجوف

المواصفات

تحويل المواصفات للمتري
الأرجحة
43.3 "
المراكز
118.1 "
ثقب عامود الدوران
9.06 "

Model: A42
Swing over bed 1100mm,750mm, 1350mm, 540mm
Bed width: 610mm
Bed way for carriage: 2 V ways
Bed way for tailstock: 1 V way and 1 flat way
Bed way for steady rest: 1 V way and 1 flat way
Between centers: 3000mm with gap
Spindle bore: 230mm / ASA-A2-15 / 7~600 rpm
Spindle center: 230mm, 305 mm – MT#6
Spindle motor: 30HP – 220/3/60
Threading: Inch: 30 ~ 0.25TPI (70 sets) / Metric: 1 ~ 120mm (62 sets)
DP: 1 ~ 120mm (80 sets) / MP: 30 ~ 0.25TPI (53 sets)
X-axis feed: 0.0016” ~ 0.048” IPR / 0.04mm ~ 1.2mm MPR
Z-axis feed: 0.0032” ~ 0.096” IPR / 0.08mm ~ 2.4mm MPR
X-stroke: 600mm
Z-stroke 3000mm
X-axis rapid traverse: 1500mm/min
Z-axis rapid traverse: 3000mm/min
Compound slide stroke: 300mm
Tailstock quill diameter: 165mm
Tailstock body movement: MOTORIZED
Tailstock quill movement: STD: HANDWHEEL/ OPT: ELECTRICAL
Tailstock quill stroke: 200mm
Tailstock center: MT#6

Equipped with:
Standard Equipment:
9” Spindle bore with A2-15 spindle nose
18 steps spindle speed
Rapid traverse for X-Axis and Z-Axis
165mm rotary tailstock quill
Tailstock quill movement: by handwheel
Tailstock body movement: by carriage
Auto lubrication system
Work light
Thread indicator
Spindle center & tailstock center
Tool box & tools
Operation manual & parts list

Optional Features and Accessories:
9” Spindle Bore – A2-15
Steady Rest 30-300mm (80mm Quill Dia.)
Taper Attachment (+/- 10 Deg.)
Aloris Quick Change Tool Post instead of Std. Tool Post
Spindle Rear-Chuck Adapter – 9”
Top Compound Slide with Power Feed
32” 4-Jaw Bison Oil Country Chuck w/ 10.5” hole

عن البائع

معلومات وجهة نظر الشركة