TSUGAMI BS-32C MARK IIIنوع السويسري الآلي وآلات برغي

بطاقة الهوية
417198
علامة تجارية
موديل
السنة
2003
الموقع
الولايات المتحدة الامريكية
رقم المخزن
396759

الوصف

TSUGAMI BS32CIII, 1 1/4", Fanuc LH1, 2003, 7-Axis, live backwork, LNS Express BF

المواصفات

GENERAL SPECIFICATIONS FOR THE TSUGAMI BS32-C MARK III

Control: Fanuc 18iTB
Standard Axes: X1, Y1, Z1, C1, X2, Y2, Z2
Maximum Bar Diameter: 1 1/4"
Z1-Axis Travel (synchronous to "Z2"): 9.75"
Main Spindle:
Spindle Speed: 200 to 7,000 rpm
Indexing: Full C-Axis (.001 degree)
Programmable Servo Axis Designations:
"Z1" Main Headstock In and Out: 9.75"
"T1" O.D. Tool Slide Up and Down: 11.6"
"x1" O.D. Tool Slide Right and Left: 2.28"
"X2" I.D. Tool Slide Up and Down: 8.66"
Auxiliary Slide Motion:
"Z2" I.D. Tool Slide In and Out:
(synchronous to "Z1"): 7.88"
Sub-Spindle Specifications:
Maximum Diameter: 1 1/4"
Maximum Drill Capacity - mild steel: .472"
Maximum Tap Capacity - mild steel: .393"
Speed Range (serial interface): 200 to 6,000 rpm
Power Rating: 2.7 hp
Sub-Spindle Indexing: 5 degree (C-Axis Opt)
Part Ejection: front or rear ejection
Horsepower of Main Spindle: 7.5 hp
Driven Tool Drive Motor Rating: 1.5 hp
Maximum Speed Cross Tool T10-T12: 200-5,000 rpm
Maximum Speed Cross Tool T13: 120-3,000 rpm
Number of Tool Stations: 6 OD, 5 ID, 3 ID/OD fixed BW tools
4 Cross Driven Tools, 2 Driven B/W
Tooling Sizes, Turning: 5/8" square
Dimensions (approx): 88" x 60" x 7'h
Weight (approx): 6000 lbs.

Equipped With (must be confirmed by buyer):
LNS Express 332 Magazine Type Bar Loader
Mayfran Chip Conveyor
Part Conveyor
Mist Buster
Off Center Drill
Full C-axis main & sub spindle (C1 & C2

عن البائع

معلومات وجهة نظر الشركة