CLAUSING MULTITURN CNC3000MTمخارط CNC

بطاقة الهوية
417932
علامة تجارية
النوع
السنة
2012
الموقع
الولايات المتحدة الامريكية
رقم المخزن
396980

الوصف

CLAUSING MULTITURN CNC 3000MT, FANUC OITD, 16"Chk, 3", 2012, FACEPLATE, STEADY R

المواصفات

تحويل المواصفات للمتري
الأرجحة
18.1 "
غراب
Yes

Specification from OEM Brochure (All details should be confirmed by buyer)

Swing Over Bed 18.1"
Swing Over Cross Slide 10.6"
Swing in Gap 28.7"
Gap Width in Front of Faceplate 8.5"
Spindle Center High From Floor 45"
Width of Cross Slide 8"
Type of Cross Slide Ways Dovetail
Bed Width 15.7"
Type of Bed Ways V and Flat Ways
Coolant Tank Capacity 25 Gallons
Spindle Nose D1-8
Spindle front Bearing I.D. 5.25"
Spindle Taper 5 MT
Spindle Bore 3.07"
Speed Ranges (Auto Selected) 3
Spindle Speed - Low Range 1 - 247 RPM
Spindle Speed - Medium Range 1 - 740 RPM
Spindle Speed - High Range 1 - 2200 RPM
Spindle Drive Variable AC
Spindle Motor (Cont./30 min) 10/15 HP
Min. Spindle Speed for Full Power 71 RPM
Power Consumption 26 KVA
Cross Slide Travel (X Axis) 11.7"
X Axis Rapid Traverse 315"/min
X Axis and Z Axis Feed Rate .0012" - 236"/rev.
X Axis Thrust (continuous) 1,464 lbs.
X Axis Ballscrew 25 x 4 mm
Saddle Travel (Z Axis) 55.0"
Z-Axis Rapid Traverse 394"/min
Z Axis Thrust (continuous) 2,196 lbs
X Axis Ballscrew 40 x 8 mm
Positioning Accuracy 0.0002"
Repeatability 0.0001"
Tailstock Taper 6MT
Tailstock Quill Diameter 3.74"

Equipped With
Face Plate
18" Bison 4-Jaw Chuck
3 Point Steady Rest

عن البائع

معلومات وجهة نظر الشركة