FELLOWS 10-4 REMANUFACTURED CNC سن تروس

المواصفات

(2) Fellows CNC Gear shaping machines
Model 10-2/4 remanufactured in 2000
s/n's 34852-479 & 35756


  Machines were remanufactured in 2000 with Fanuc Powermate controls.
 The 2-axis control allows full control of feed and speeds while only the
 operator changes two gears in the back of the machine for index or number of
 teeth in the part. This is done by simply changing only (2) two change gears
 in the back of the machine for different numbers of teeth. If you are running
 production then this should be a non issue!!

 2 Machines are available. 
 One Machine is equipped with a Tailstock and the other is not!
 Machine S/N 34852-479 is equipped with the Tailstock as photographed!
 Machine S/N 35756 Is NOT equipped with a tailstock.

Machine specifications are as follows:
Machine Specifications:
 Max pitch diameter (External)...........................................10"
 Max pitch diameter (Internal)...........................................10"
 Max face width, external & internal......................................4"
 Spindle Positioning Axis...............................................0-3''
 Max diametrical pitch spur............................................4 DP
 Max diametrical pitch helical.........................................5 DP
 Bore through work spindle............................................5.875"
 Cutter spindle diameter..............................................3.543"
 Max helix angle with special guides.................................45 deg.
 Distance between table & cutter (w/no riser)............................10"
 Max. OD of fixture......................................................19"
 Dimensions (L x H x W).....................................91" x 105" x 72"
 Machine net weight, approx......................................13,000 lbs.



Machines are equipped with :
 Fanuc Power mate controls for 2 axis                                                                                2 Machines are Available              .                                                                Retrofit With GE Fanuc Powermate D 2-Axis CNC Control                                                                Max Pitch Diameter, External             10"                                                                Min Pitch Diameter, Internal             10"                                                                Max Diametral Pitch, Spur             4 DP                                                                Max Diametral Pitch, Helical             5 DP                                                                Max Face Width             4"                                                                Max Helix Angle w/ 5" Cutter             45 Deg                                                                Max O D of Fixture             19"                                                                Max Stroke Length             5"                                                                Max Strokes Per Minute             800 SPM                                                                Max Distance - Tabletop to Spindle             9"                                                                Feed Per Stroke             .001-.040                                                                Cutter spindle diameter             3.543"                                                                Work spindle bore diameter             5.875"                                                                Work spindle bore depth             10"                                                                Table Surface to Cutter Spindle Underside                                                                In Uppermost Position             13.23"                                                                Worktable C L to Cutter Spindle CL             9.06"                                                                Maximum OD of fixture             19"                                                                Rotary Feed Per 1" of Stroke             .001"-.012"                                                                Rotary Feed For Multi-Pass             .001-.020"                                                                Radial Feed Range Per Stroke             .0001"-.020"                                                                Max Radial Feed Per Minute             .12"                                                                Machine Dimensions             93" x 103"                                                                Machine Height             101"                                                                Approx Machine Weight             13,000 Lbs                                                                                              EQUIPPED WITH:                                                                GE Fanuc Powermate D 2-Axis CNC Control, 1999/2000 Retrofit W/ AC Frequency Spindle Drives                                                                Hydraulically Operated Cutter Guard Assembly                                                                Hydraulically Operated Table Fixture Clamping                                                                  15 HP Main Drive Motor
 Lite Safety Curtains
 2-Hand Safety Start Buttons   
 A/C Frequency Spindle drives for stroking motors.
 2-4" stroke capacity can be changed prior to shipping


 Machines can be inspected under power in our Statesville, NC plant with
 proper notice!! visit WWW.PiselliEnt.com . Visit our website to view 
these machines as well as our vast inventory of other CNC Gear shapers
and hobbers. Im sure your'll find our inventory worth viewing!!