DECKEL MAHO DMC 60Tمراكز تصنيع عالمية

الوصف

Deckel Maho 5-axis Machining Center, Made in Pfronten, Germany Year 2007 Model DMC-60T EXCELLENT condition, only 10,520 operating hours. Can be seen running in Ontario, CANADA

المواصفات

تحويل المواصفات للمتري
X
30.71 "
Y
22.05 "
Z
22.05 "
الأكسات#
5
القدرة
37.5 hp
RPM
12000 rpm
# ATC
60
الجدول-W
19.7 "
الجدول-L
24.82 "
انحناء
CAT-40
CNC تحكم
CNC (HEIDENHAIN ITNC 530)

Technical Specifications: (Subject to Verification), Have more details available upon request.

-WORKING RANGE-
Traverse range X (longitudinal) 30.71" (780 mm)
Traverse range Y (transverse) 22.05" (560 mm)
Traverse range Z (vertical) 22.05" (560 mm)

-ROTARY PALLET CHANGER WITH INTEGRATED NC ROTARY TABLE (C-AXIS)-

-High rapid feed rate
-Note this machine is equipped w/the optional 100mm distance T-slot pallets
-Pallet changer allows setup during production time
Rotation range 360 x 0.001 degree (Full 4th Axis)
Clamping Surface 19.7" x 24.8" (500 mm x 630 mm)
Number of Pallets 2
Maximum table load 880 lbs (400 kg)
Maximum table speed 30 rpm
Pallet change time Approximately 10 seconds
-SWIVEL MILLING HEAD WITH PROGRAMMABLE B-AXIS-
-Integrated 12,000 rpm motor spindle
-High pressure coolant supply centrally through spindle centre
Swivel Range............................ 150 degrees (-120/+30 degrees)
150 degree swivel range allows UNDERCUTS and machining at NEGATIVE ANGLES
due to the swivel range of 30 degrees across the horizontal or vertical axis.
Rapid motion B-axis............................................. 35 rpm
Swivelling time of the head from horizontal-vertical & vice versa 1.5 secs
Positional uncertainty P................................. 9 arc seconds
-INTEGRATED MOTOR SPINDLE-
Type.............................................. Digitally controlled
Cooled drive..................................................... Water
Power 40% ED.......................................... 37.55 hp (28 kW)
Power 100% ED.......................................... 25.5 hp (19 kW)
Spindle speed range......................................... 12,000 rpm
Spindle Taper.................................................. CAT40
Clamping power.................................................... 8 kN
-FEED DRIVES-
Feed Rate X/Y/Z..................................... 590 ipm (15 m/min)
Rapid Feed Rate X/Y/Z............................. 1,968 ipm (50 m/min)
Maximum Feed Rate X/Y/Z........................... 1,968 ipm (50 m/min)
ACCELERATION X/Y/Z.................................. 0.6 g IN ALL AXES
Feed Power X/Y/Z........................................... 7/7.2/10 kN
-60 POSITION VERTICAL CHAIN AUTOMATIC TOOL CHANGER-
Magazine pockets.................................................... 60
Maximum tool weight................................... 17.64 lbs (8 kg)
Maximum tool diameter without free pockets............... 3.15" (80 mm)
Maximum tool diameter with free pockets.................. 6.3" (160 mm)
Maximum tool length..................................... 12.4" (315 mm)
Tool change time Approximately 0.8 seconds, double gripper tool changer
-EXTERNAL COOLANT SUPPLY ON THE OUTSIDE OF THE SPINDLE-
Pump output.............................. 10.6 gallon/minute (40 l/min)
Pump pressure......................................... 22 PSI (1.5 bar)
PRODUCTION PACKAGE-
-238 gallon (900 l) coolant unit capacity
-Automatic paper filter cleaning with fine filtering of the complete
emulsion to less than 50 um
-Cleaning of the spindle by spindle air blast for high
precision also for cleaning with frequent tool changes
-580 PSI (40 bar) 6 gallon/min (23 l/min) coolant thru the spindle centre
-Chip flushing inside work cabin
-Chip conveyor
INSTALLATION DATA-
Operation voltage..... 400 V input (comes with multi input transformer)
Control voltage................................................... 24 V
Max at 100% duty cycle........................................... 100 A
Total weight with pallet changer..... Approximately 22,000 lbs (9 tons)

Equipped with
Heidenhain iTNC530 CNC Control with HR410 electronic handwheel
Blum Laser tool length and diameter measuring, horizontal/vertical
Air blast through spindle centre, selected with M-function
Spay pistol with pump
Multi input transformer
Heidenhain glass scales direct measuring system X/Y/Z Axes
Heidenhain rotary encoders direct measuring system B/C Axes
External coolant nozzles on outside of spindle air/coolant selectable
Spindle chiller
Manuals and cd
Full enclosure of machining area for safety and noise reduction
Sensitive machine parts (measuring systems, limit switches, guide-ways, drives) are separate from the machining area
Automatic pallet changer.

عن البائع

معلومات وجهة نظر الشركة