قاطعات الليزرMAZAK OPTONICS FABRI GEAR 150
Iowa, الولايات المتحدة الامريكيةنظرة عامة
علامة تجارية
موديل
بطاقة الهوية
424996
النوع
حالة
مستعملة - جيد
السنة
2008
الموقع
Iowa
الولايات المتحدة الامريكية
الولايات المتحدة الامريكية
عودة السياسة
كما هو
رقم المخزن
100066
Touch Sensor • Auto Power Off
• 8 meter in – 8 meter out • No software included
• Hours: 23,877 Approximate •
(General Specifications & Additional Information shown is subject to verification/inspection)
وات | 4000 w |
CNC تحكم | CNC (FANUC L-64) |
ورقة المواصفات
USED MAZAK 4000 WATT MODEL FABRIGEAR 150 (8m) 3-D TUBE LASER
Installed New in November 2008
ITEM
SPECIFICATIONS
REMARKS
Model Name
Fabri Gear 150
Type
Hybrid Type
X axis: Chuck Travel
Y axis: Beam Travel
Maximum Machining Size
Round Material – 6”
Square Material – 6”
Material and Part Weight Limit
Maximum Total – 727 lbs
Maximum Per Foot – 32 lbs
For mild steel (Note 1)
Height to Material Rotation Center
37.41”
From floor level
Axis Motion Stroke
X: 352” / U: 345” / V: 91.14”
Y: 38.78” / Z: 14.57”
A: + 3600 / B: + 1350
Rapid Traverse
X, U & V: Approx 3937 ipm
Y: 1,417 ipm / Z: 1,181 ipm
A: 96000/min / B: 96000/min
C: Approx 200000/min
ITEM
SPECIFICATIONS
REMARKS
Axis Drive System
AC servo motor: Digital servo drive
X-axis: Rack & pinion
Y & Z axis: Ball screws
Positioning Accuracy
X, U, & V axis: +0.0020 in./19.69 in.
Y-axis: +0.0004 in./19.69 in.
Repeatability
X, U, & V-axis: +0.0004 in.
Y & Z-axis: +0.0004 in.
Machining Head
Standard focal length 7.50” lens
Z-axis Profiling
Non-contact type
Capacitance
Note 1: Maximum cutting thickness, feedrate and edge quality vary depending on the variability
of material chemistry and surface condition.
Note 2: Provided that the recommended foundation work is carried out and the machine is
Installed properly.
1. Material handling units
Item
SPECIFICATIONS
Remarks
Fabri Gear 150
Quantity
In-Feed Loader Supports
3
Out-Feed Unloader Supports
4
Transportable length
Automatic Loader
135.83” to 314.96”
Raw material must be delivered to the machine in one of these lengths
Automatic Unloader
27.56”-314.96”
Completed parts smaller than 27” will fall into a small parts catcher
Manual Unload
Any Part Smaller than 27”
The automatic unloading conveyor cannot process parts of this size.
Number of “V” Style Loader/Unloader Locations
5
Loads and unloads up to 5 pieces of material automatically
Transportation Stroke
39.5”
Transportation Speed
Approx. 196.9ft/min
Drive Method
AC induction motor
Material delivery method
Manual operation
رؤية المزيد من العقارات المعروضة من هذا النموذج
MAZAK OPTONICS FABRI GEAR 150
قاطعات الليزر
رؤية المزيد من العقارات المعروضة من هذا النوع
NTC TLM-610
قاطعات الليزر
KOIKE ARONSON LASERTEX LT-5060
قاطعات الليزر
REVOLUTION MACHINE TOOLS KYSON 510 2KW
قاطعات الليزر
TRUMPF L2530 CNC LASER SYSTEM
قاطعات الليزر
رؤية المزيد من العقارات المعروضة لهذه العلامة التجارية
MAZAK OPTONICS SUPER TURBO X44
قاطعات الليزر
MAZAK OPTONICS SUPER TURBO X-510 MARK II
قاطعات الليزر
MAZAK OPTONICS HYPER GEAR 510
قاطعات الليزر
MAZAK OPTONICS SPACE GEAR U 44
قاطعات الليزر