OKUMA & HOWA V60R-Mعمودي مملة ميلز (incld VTL)

بطاقة الهوية
425566
علامة تجارية
موديل
حالة
مستعملة - جيد
السنة
2005
رقم المسلسل
3006
الموقع
Illinois
الولايات المتحدة الامريكية
عودة السياسة
كما هو
رقم المخزن
38331-1
الثمن
صور ( 10 )
بطاقة الهوية
425566
علامة تجارية
موديل
حالة
مستعملة - جيد
السنة
2005
رقم المسلسل
3006
الموقع
Illinois
الولايات المتحدة الامريكية
عودة السياسة
كما هو
رقم المخزن
38331-1
الثمن

الوصف

A Live Milling VTL and that feature was never used. Machine has been gone thru and runs like a top. A very well maintained machine!

المواصفات

تحويل المواصفات للمتري
قطر المنضدة
24 "
الأرجحة
27.6 "
ارتفاع الشغل U/R
25 "
القدرة
40 hp
RPM
2000 rpm
الأبعاد
81" x 102" x 144"
الوزن
21,000 lbs.
CNC تحكم
CNC (Fanuc 18i-T)

Okuma Howa V 60R-MC, 15" Chuck Vertical Turning CNC Lathe

Model: V60R-MC
S/N: 3006
Year: 2005
Condition: Good

Specifications:
Max Swing 27.6"
Maximum Cutting Diameter 24.00"
Maximum Cutting Length 26.00"
X Axis Travel 14.6"
Z Axis Travel 26.00"
Rapid Traverse Rate 944 IPM X and Z
Spindle Center Height From Floor 42.7"
Spindle Nose A2-11
Spindle Speeds, Infinitely Variable 20 - 2,000 RPM
Spindle Drive Motor 40/30 HP
Turret Type V 12
Number of Driven Tools 6 stations
Driven tools RPM 1-2000 RPM
Collet for Driven tools ER 323
Max Tool size 1.250" (tap M20)
Driven tools HP 5 HP
C axis .001 Deg.
Floor space required W 80.94" X L 101.96"
Machine Height H 144.09"
Machine Weight (Approximate) 20,900 Lbs.

Equipped With:
Fanuc CNC Control 18 IT
HOWA Hydraulic 3-jaw Chuck - 15" (24” chuck available)
Standard tooling Package, 3 stick, 3 boring bar
The Live milling feature was never used!
Two new Live heads, 1) Axial, 1) Radial
High And Low Chucking Pressure (OPTION)
Chip Conveyor Rear Discharge
Interfaced for robot
Original door will be placed back onto machine prior to shipping
Live milling with C axis
Coolant tank and pumps
Coolant thru the turret
480V / 38 KVA
All available Manuals
This machine was rebuilt on 5/17/2012

THIS IS WHAT WAS REBUILT ON MACHINE.
Disassemble Machine as necessary for Repair
Cleaned and inspected all parts for wear or damage and advise
Rebuilt spindle complete
Repair and replaced ball screws as needed
Replaced all thrust bearings for ball screws
Grind column ways flat Parallel and square
Machined back of saddle
Scraped saddle to match column ways
Grind ways on top of saddle flat, Parallel and Square
Machined vertical slide
Scraped vertical slide to Match top of saddle
Machined and scraped all gibs and hold downs
Cleaned out way lube system and replaced metering units as needed
Replaced all way wipers
Assembled machine complete.

Inspection report available.

F.O.B.: Milwaukee, WI

PRICE …………………. $89,900.00

عن البائع

معلومات وجهة نظر الشركة