KOLOMNA 1580عمودي مملة ميلز (incld VTL)

بطاقة الهوية
428632
علامة تجارية
موديل
حالة
تستخدم - ممتاز
السنة
1964
الموقع
Bydgoszcz
بولندا

المواصفات

تحويل المواصفات للمتري
قطر المنضدة
279.5 "
الأرجحة
315 "
ارتفاع الشغل U/R
127.6 "
RPM
19 rpm
الأبعاد
9000 x 14000 x 8000
الوزن
195T

RETROFITTED IN 2006
The largest diameter of the workpiece - 8000 mm
The greatest height. workpiece - 3240 mm
The diameter of the disc table - 7100 mm
The biggest shift sliders rests vertical (right and left) - 2000 mm
The highest levels of vertical travel of the slides (right and left) - 4400 mm
Mileage axis slider slides off the center of the shield handle - 150 mm
Vertical rotation angle bracket right - -15 ° - 30 °
Vertical rotation angle bracket left (combined) - -15 ° - 30 °
Sliding horizontal slider bracket side - 1250 mm
Vertical travel of the slider carriage side - 2,800 mm
Maximum weight of the workpiece at a speed table
to 15.5 rev / min - 125 tons
Maximum weight of the workpiece at any speed - 63 tons
The speed range of the table - 0.23 - 19,3obr / min *

The largest total cutting force - 160 kN
The biggest moment of cutting - 400 Nm
Range of feed carriages vertical and horizontal - 0.0352 - 275mm / min
The feed rate accelerated sliders and carriages - 2400 mm / min
The speed of the beam - 300 mm / min
Main engine power - 25 kW
Lifting capacity of the crane - 75 ton
Suport combined (slide left)
Boring spindle diameter - 125 mm
Spindle stroke - 1000 mm
Maximum torque of the spindle - 3500 Nm
Spindle speed n - 20 - 650 r / min
Number of degrees of speed spindle - 16
Max-min vertical feed spindle - 0.0352 - 215mm / min
The rate accelerated feed spindle - of 2400 mm / min
Shift the slider to slide in the y-axis - 2000 mm
Feed range slider and bracket
Min - 0.0352 mm / min
Max - 285 mm / min
The feed rate accelerated slider and slide - 2400 mm / min
The greatest strength of the cutting blade when running from the front bracket
L <= 1000 mm - 80 kN
L <= 1700 mm - 50 kN
L <= 2300 mm - 30 kN
The extreme angles of rotation slide - -15 ° - + 30 °
The electric motor drive main spindle - 10 kW
Max spindle feed force - 30 kN
Cone Size spindle DIN 2080 - Metric 80

Rotating head
The largest dimension of the leading fi cutter - 150 mm
The greatest torque on the spindle - 500 Nm
Spindle speeds - 80 - 675 r / min
Number of degrees of spindle speeds - 10
Cone Size spindle - 7:24 (fi 69:85)
The electric motor - 4.5 kW
The device for turning cones
Limit the angle of inclination forming turned cones - 3 ° - 87 °
The spacing between the values of the executioners - 1 °
Weight - 0.22 tons
boring bar
Boring length - 1600 mm
The largest diameter embossed as hole - 400 mm
Range of feed - 0,0435- 352 mm / min
Weight - 1.33 kg
Device for setting the workpiece
Shift the slider - 1500 mm
The greatest strength of the slider - 950 kN
Feed speed slider - 70 mm / min
The electric motor - 4.5 kW
Weight - 2800 kg
Device for centering the workpiece is used to adjust the object relative to the axis of rotation of the disc table. The device is made as a separate unit type portable and is set next to the disc table on the board fixed. In making the slider device based on the set object and moves it in the desired direction.
special equipment
Suport combined -
iMac has a slider with a knife to perform normal work of turning and besides has a vertical spindle boring, allowing for the execution of drilling, boring and milling.
Apparatus for processing cones
- Consists of a guide, a set of gear shift and special holder for the blades. By the selection wheel shift is determined kinematic connection between the horizontal and vertical displacement of the knife.
A set of wheels shift allows turning, internal and external tapers of the angle forming between 3 ° - 87 ° in 1 ° increments
Copy turning shaped surfaces.

عن البائع

معلومات وجهة نظر الشركة