ERMAK HVR 3100 10المقص التربع الطاقة (بوصة)

بطاقة الهوية
430750
علامة تجارية
موديل
حالة
مستعملة - جيد
السنة
2008
الموقع
Michigan
الولايات المتحدة الامريكية
رقم المخزن
10419

الوصف

Used Ermak 3/8" x 10' Hydraulic Shear, CNC HVR 3100 10, 2008, Hyd, CNC controlled, 40” FOPBG, 30H.P., CNC front gauge, Rear conveyor

المواصفات

تحويل المواصفات للمتري
أقصى سمك
0.375 "
طول بليد
10 '
HYD / الميكانيكية
Hyd
القدرة
30 hp
SPM
12 spm
الأبعاد
164” x 101” x 98”
الوزن
25,000 lbs. (machine only)
CNC تحكم
CNC (Cybelec DNC 60 CNC control)

Used Ermak 3/8" x 10' Hydraulic Shear, CNC HVR 3100 10, 2008, Stock No. 10419
Capacity: 3/8”
Maximum Cutting Length: 10’
Throat Depth: 13-3/4”
Rake Angle: .5 - 2 degrees variable
Gap adjustment: .02” - .05” variable
Strokes Per Minute: 12 full / 22 short
Number of Holddowns: 14
Hold down force: 26 tons
Backgauge range: 40”
Main Motor: 30 H.P.
Electrics: 220 / 440 volt 3 phase
Currently Wired: 440 volt 3 phase
Oil capacity: 69 gallons
Approximate Dimensions without gauges: 164” x 101” x 98”
Approximate Weight: 25,000 lbs. (machine only)
Machine includes:
Free standing overhead bridge crane system with hoist for loading sheets (1,000lb. capacity)
96” x 48” 10,000 lb. hydraulic lift table for lifting sheets to the shear table
Powered rear transfer conveyor to unload cut parts
CNC front gauging system
Spare parts (Conveyor belts, hold downs, etc.)
Equipped with:
40” CNC controlled backgauge system with swing up at end of travel and retract
CNC controlled hydraulic blade gap adjustment
CNC controlled hydraulic rake angle adjustment
CNC controlled stroke length
Cybelec DNC 60 CNC control
CNC front gauging system consisting of (1) 140” stationary squaring arm and (1) 100” support arm (adjusts left to right) with ball transfers
Rear slide plates for cut parts
Ball transfers in table
Wear resistant 4-sided blades
Pendant control arm
Sick model M2000 rear safety light barrier
Siemens electric system
Hoerbiger hydraulic system
Portable foot pedals

عن البائع

معلومات وجهة نظر الشركة