TRUMPF TRULASER TUBE 7000قاطعات الليزر

صور ( 7 )

علامة تجارية
بطاقة الهوية
435064
السنة
2011
الموقع
New York
الولايات المتحدة الامريكية
رقم المخزن
11278

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على TRUMPF TRULASER TUBE 7000 ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .

بطاقة الهوية
435064
علامة تجارية
السنة
2011
الموقع
New York
الولايات المتحدة الامريكية
رقم المخزن
11278

المواصفات

TRUMPF TRULASER TUBE 7000,OPTIONAL 30' RAW PIECE LENGTH, MFG:2011 Our stock number: 11278

TruLaser Tube 7000 Specifications
Z-axis: 8 in. (200 mm)
Y-axis: 8 in. (200 mm)
Optional 10 in (254 mm)
X-axis: 252 in. (6500 mm)
Optional 360 in. (9200 mm)
Rotation axis A1-(Rotating Chuck and Feed Unit): 360
Rotation axis A2-(Tube Feed Guide Unit): 360

Capacitive height regulation range: + 0.79 in. (20 mm)
Positioning speeds, maximum:
X: 3,937 in./min. (100 m/min)
Y: 2,362 in./min. (60 m/min)
Z: 2,362 in./min (60 m./min.)
A: 900/sec

Max. length of raw tube for automated production: 252 in (Optional 360 in.)
Max. wall thickness: 0.3 in. (8 mm)
Max. tube weight 8 in: 17 lbs / linear ft
Optional max tube weight 10 in: 25 lbs / linear ft
Length of finished part: 120 in - Standard machine unload
251 in. - PRS 6001

Tube waste length: Round/Rect./Square tubes:
4.7 in. (120 mm) Min.

Largest tube cross-sections that can be worked: 8 in. (203.2 mm) diameter

envelope
10 in (254.0 mm) as option

Smallest tube cross-sections that can be worked: Round tubes: O 0.6 in. (15

mm)
Minimum edge length on square and
rectangular tubes: 0.6 in. (15 mm)

Other types of profiles and sections (other than round, square and

rectangular) must be
examined separately with respect to machining, feed, separation and clamping

possibilities;

Laser units: (in Watts) TruFlow 3600
System power consumption: See installation conditions
Control system: Siemens 840D
Max. working pressure: 290 psi. (20 bar)
Working height: 44.3 in. (1,125 mm)
Space requirements (standard version): See layout
Total weight: Varies with the configuration
*Accuracy (X, Y, Z, A axes):
Smallest programmable increment: 0.0004" (0.01 mm) / 0.001
Positioning accuracy (Pa) + 0.008" (+ 0.2 mm) / 0.015
Repeatability (Ps) + 0.002" (+ 0.06 mm) / 0.005

Options Description
SeamLine (weld-seam detector system)
A light contrast-measuring device able to find most weld seams. Samples of

your tube should be
evaluated before this device is ordered.
Increased tube diameter
Possibility to handle and process tubes with a maximum outer circle diameter

of 10 in

Material Handling Options:

Loading
LoadMaster Tube 30 ft with auto tube loader
Automatic tube feed for round, square and rectangular tubes with the help of a

bundle magazine. Can be
used for tube lengths of 10 ft up to 30 ft. Integrated length measurement and

zero point positioning of
raw material in the transfer unit. The maximum bundle weight is 8.800 lbs.
The tubes are transported onto a buffer tack from the bundle magazine. As an

alternative, tubes can
be loaded on the buffer track manually. A gripper system picks the tubes up

from the buffer track and
transfers them to the feed and rotary station.
Slewable conveyor path for LoadMaster Tube
For manually loading of small lot sizes and the processing of special

profiles.

Unloading
Part removal station 21-ft with brush conveyor
Larger form of the standard unload, allowing automated finished part unload of

parts up to 21 feet in
length. Incorporates tube supports unloading to an incline, then to a brush

table conveyor.
Additional part removing rear for part removal station
Parts can be unloaded on the brushtable to the front or into a box to the

rear.

عن البائع

معلومات وجهة نظر الشركة

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على TRUMPF TRULASER TUBE 7000 ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .