CNC NEW, INC. GT-155 محور أو أكثر مخارط CNC

صور ( 10 )

علامة تجارية
بطاقة الهوية
الجديد في المخزن
الولايات المتحدة الامريكية

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على CNC NEW, INC. GT-15 ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .

بطاقة الهوية
علامة تجارية
الجديد في المخزن
الولايات المتحدة الامريكية


We are delighted to present the GT-15 standard gang tool lathe without live tools or turret. We are confident that you will find this product a versatile, flexible and reliable addition to your companies manufacturing capabilities. Our single-piece heavy casting is the culmination of years of experience in machine tool manufacturing and offers the best features for gang tool and turret lathe construction. This machine configuration provides a very cost-effective approach for mill-turn, or servo drive live tool applications on a wide range of part diameters and sizes. Our driven tool spindles can perform axial milling, drilling, boring, broaching, radial milling and gear hobbing, and tapping functions. The NEW 980TDi CNC control with updated software/hardware is a very aggressive full-featured control with 2ms block processing and programs with G-codes and M-functions. This control uses the GSKLINK bus technology, matched with 17bit absolute encoders that carry out automatic recovery of the system power-on no-block mechanical zero return, servo parameter on-line modification or servo state on-line diagnosis, etc. We are using a servomotor and drives on the spindles to perform C-Axis functions. This combination will provide the best performance and number of duty cycles per minute, and will also facilitate the use of live tools. Standard Features: 4-Axis simultaneous control, 5-axis digital feed control, 2-axis analog feed control, LAN interface Ethernet Port, complex curve surface machining speed: 8m/min optimum machining speed: 4m/min, Max. Positioning speed: 60m/min max. Feed-Rate: 15m/min 1000 block look-ahead and spline interpolation, Excellent high-precision and high-speed interpolation, Supports macro programs (Macro B) more concise programs, Supports PLC online monitoring, edit, compile and signal follow functions, Supports multiple languages with a change of a parameter, Supports RS232, USB and network interfaces and data transfer, DNC machining and USB on-line machining, Color LCD monitor with 800 X600 resolution 8.4 or Optional 10.4, Rigid tapping, graphic programming, run and test program by hand wheel, 208v (Range 190-240) 3-phase system electronics. 64M program space 60Mb user storage (program capacity). We have also developed post processors for the GSK controls in Autodesk cloud product Fusion 360 CAM software to solve the programming challenges involved with this type of 5-Axis work.


تحويل المواصفات للمتري
حجم الظرف
8.26 "
سعة العامود
2 "
10 hp
ماكس RPM
4500 rpm
قطر الخراطة
15.74 "
7.55 "
غراب (نعم/لا
87.4 x 56.6
CNC تحكم
CNC (GSK 980 TDi)

Capacities SAE METRIC
Chuck Size: 8.26 in 210 mm
Max Turning Diameter: 15.74 in 400 mm
Max Swing Over Table: 7.55 in 192 mm
Bar Capacity: 1.96 in 50 mm
Travels & Feedrate: SAE METRIC
Max. X-Axis Travel: 17.5 in 420 mm
Max. Z-Axis Travel: 13 in 333 mm
Rapid on X-Axis: 590 in/min 15 m/mm
Rapid on Z-Axis: 787 in/min 20 m/mm
Axis Max Feed Rate: 400 in/min 10.15 m/min
Spindle & Motors: SAE METRIC
Power Rating: 15hp(11kw)
X/Z Axis Servo Motors: 5.2 hp 3.9 kw
RPM: 15-4500 rpm
Spindle Bore: 2.40 in 61 mm
Drawtube Bore: 1.96 in 50 mm
Spindle Nose: A2-6
Collet Actuator: Hydraulic Cylinder(Opt Pneumatic)
Integral Casting: One Piece Construction,Slant Angle 45 degree
Rail Span: 17.32 in 440 mm
Casting Weight: 3300 lbs 1,500kgs
Linear Rails X/Z: 1.81 in 30 mm P Accuracy
Ball Screws: Precision X/Z Ground 1.26 in 32 mm C3 Accuracy
Auto Lubrication: Linear Rails and Ball screws
Head Stock: Cast Iron
Turret Working Holding: SAE METRIC
Gang Turret Table HT.: 3.543 in 90 mm
Table Length T-Slot: 24.41 in 620 mm
Chuck Size: 8 inch
Center Height Holders: 1/2, 3/4 in Riser Blocks or Custom Tool Holders
Collet Nose Options: A2-6
Precision SAE METRIC
Positional Repeatability: +/- 0.0001 (one tenth) / +/- 0.00254 mm
Positional Resolution: +/- 0.00005 (50 millionths) / +/- 0.00127 mm
Positional Accuracy: +/- 0.0001 (one tenth) / +/- 0.00254 mm
Spindle Runout: +/- 0.00005(50millionths) / +/- 0.00127 mm
C-Axis Indexing: Increment 0.001 deg. 360K Rad.Pos.
Requirements: SAE METRIC
Coolant Capacity: 18.5 gal 70 lit
Coolant Pump: 3/4 hp 0.5 kw
Compressed Air: 5 SCFM(Clean,Dry Air) Live tools
Power Required: 16 KVA 42 amps
Voltage: 208-240 VAC 3 phase
Machine Dimensions SAE METRIC
Floor Space L X W: 68X35 in 1730X890 mm
Machine Height: 63.0 in 1600 mm
Sheet Metal Length: 87.4 in 2220 mm
Sheet Metal Width: 56.6 in 1438 mm
Machine Weight: 4,500 lbs 2,045 kg

عن البائع

معلومات وجهة نظر الشركة

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على CNC NEW, INC. GT-15 ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .