راقب
راقب

المطاحن الأسطوانية العالميSHARP OD-820SE

الولايات المتحدة الامريكية

نظرة عامة

علامة تجارية
موديل
بطاقة الهوية
447451
حالة
مستعملة - جيد
السنة
2020
الموقع
الولايات المتحدة الامريكية
رقم المخزن
1981
الوصف
7.9” X 19.7” OD Grinding Capacity with Servo Motor & Ballscrew Driven Infeed, MT3 Tailstock, Manual Dresser Mounted on Tailstock, Chuck or 5C Collet Workhead +/- 45° Swinging Grinding Head, Flood Coolant System, Work Light and Tool Kit Included.
المواصفات
تحويل المواصفات للمتري
الأرجحة8.7 "
المراكز19.7 "

ورقة المواصفات

STANDARD EQUIPMENT: Auto Lube System Coolant System Grinding Wheel with Flange (14” x 1.5” x5”) Wheel Flange ( 5 “) Workhead, MT # 3 Manual tailstock, MT # 3 Carbide Tip Center ( MT # 3 x2) Balancing Arbor Halogen work light Diamond (Wheel) dresser with holder Wired 220V (440V Requires Optional Transformer) Tool Box with Adjusting Tools FEATURES: Total indicator reading of spindle within 120 millionths of an inch Spindle of wheelhead mounted on 2 matched pairs of preloaded high precision angular contact bearings (bearing ID exceeds 2.15”) Worktable with 3 different speed, can be swiveled up to +/- 8 degree for cylindrical corrections and taper grinding applications The high accuracy of the friending wheel spindle is achieved with the use of cartridge type spindle supported by four super precision, angular contact, class 7 ( ABEC) bearings. With a cast body and hardened Nitralloy steel sleeve designed to hold a MT3 center, the tailstock is both rigid and robust. With the manual wheel dresser mounted on the tailstock, dressing the wheel is less time consuming Machine base is heavily ribbed box type machine base is made of Meehanite casting to provide rigidity and stability. One Vee and one flat guideways are spaced at the optional distance to assure maximum table support. Workhead is truly versatile with its change over ability from a lever type 5 C collet closer to a 3 jaw chuck or live and dead center set up, the workhead has added versatility with the ability to swivel +/- 45 degrees. Auto lube system lubricates all sliding ways when machine is on Servo Motor & Ballscrew on Infeed for “SE” model using touch screen conversational program SPECIFICATIONS: Capacity Swing over Table 8.7” Distance Between Centers 19.7” Max Grinding Diameter 7.9” Max Load Between Centers 176 lbs Wheelhead Infeed Travel 6.3” Hand Feed Travel 6.3” Top Slide Travel 7” Auto Rapid travel 1.75” Auto Increment Infeed ( SE version) 0.001” – 0.1 “ dia. Hand Wheel per Graduation (dia.) 0.0002” Handweel per Revolution (dia.) 0.1” Swivel Angle fixed Grinding Wheel OD x Width x ID 14” x 1.5” x 5” Wheel Speed 1620 rpm Internal Grinding Attachment (opt.) Grinding Bore Range 0.95”- 2.75” dia. Max. Grinding Length 2.75” Spindle Speed 14,000 or 25,000 rpm Max Chucking Length 10.8” Mac Chucking Diameter 4” Workhead Spindle Speed ( inverter) 35- 350 rpm Swivel Towards Operator & Away from Operator +/- 45 degrees Taper of Center MT 3 ( OP 5 C) Table Traverse Speed 15.75 ipm Handwheel per Revolution) 0.35” Swivel Towards Operator and Away from Operator +/- 8 degrees Tailstock Spindle Stroke 1” Center Taper MT#3 Motors Wheel Drive 3 HP Workhead Drive 0.5 HP Hydraulic Pump Drive 2 HP ID motor ( option) 0.5 HP Dimensions Width x Depth x Height: 87” x 54”x74” Approx. net Weight: 4,070 Lbs Power Total Power Consumption: @ 220V 8KVA/22 amps, @ 440V 8KVA/ 11 amps
عن البائع
الثمن

رؤية المزيد من العقارات المعروضة من هذا النوع

CINCINNATI

المطاحن الأسطوانية العالمي

1968 | Michigan, الولايات المتحدة الامريكية
thumb

LANDIS 3RH

المطاحن الأسطوانية العالمي

1980 | Michigan, الولايات المتحدة الامريكية

CINCINNATI

المطاحن الأسطوانية العالمي

1950 | Michigan, الولايات المتحدة الامريكية

CINCINNATI

المطاحن الأسطوانية العالمي

1970 | Michigan, الولايات المتحدة الامريكية
عرض جميع

رؤية المزيد من العقارات المعروضة لهذه العلامة التجارية

thumb

SHARP SV-4328SX

مراكز التجهيز العمودي

الجديد في المخزن | California, الولايات المتحدة الامريكية
thumb

SHARP LMV

مطاحن العمودي

الجديد في المخزن | California, الولايات المتحدة الامريكية
thumb

SHARP 1118H

مخارط الدقة

الجديد في المخزن | California, الولايات المتحدة الامريكية
thumb

SHARP 2680B

مخارط المحرك

الجديد في المخزن | California, الولايات المتحدة الامريكية
عرض جميع