TARUS TBM5العملاقة الآلات مراكز (incld. بريدج وعمود مزدوج)
Specifications of Machine
X Axis is 144"
Y Axis is 120", space between columns is 172"
Z Axis is 46", daylight is 50.4"
Maximum Feedrate is 1300" per minute
Maximum Acceleration Rate is .2 G
Worktable is 116" by 154"
Overall Height: Installed in Pit: 203", Installed above Floor: 216"
Machine structure is welded steel plate. Ribbed and Boxed Structures, fabricated and machined by TARUS in the USA
X, Y and Z Axes are Ballscrew driven (76.2 mm diameter, 10 mm pitch) with Liquid Cooled Torque Motors directly coupled to Ball-nuts
Linear Bearing Rails on All Axes
Folding doors on front of machine for loading workpiece.
TRAMEC Fork Style Milling Head and Fischer Spindle
Fork Style Milling Head, Torque Motor Direct Drive, Hydraulic Clamping, Cartridge Spindle
A Axis is +/- 110 degrees, C Axis is +/- 360 degrees
A Axis Peak Positioning Force is 960 Nm, C Axis is 960 Nm
A Axis Clamping Force is 3000 Nm, C axis is 3000 Nm
Spindle: FISCHER Cartridge, HSKA63, 20,000 RPM, 31kW, 148Nm (S6)
TARUS will equip this machine with the Heidenhain TNC 640 CNC and all options needed for this particular machine and the process.
Heidenhain Servo Drives and Absolute Position Scales
Heidenhain Wireless Measuring Probe for Spindle
Heidenhain Wireless Tool Length Measurement Probe
Full integration of CNC and Machine including PLC Programming
Automatic Tool Changer
Max Length of Tool: 400 mm
Max Diameter of Tool: 180 mm
Max Weight of Tool: 12 kg
Maximum Tool Weight for Entire Magazine: 576 kg
Magazine fixed to floor at rear of worktable, exchanger arm travels on manipulator slide which passed through automatic door.
Magazine and Manipulator are driven by Servo Motor, Exchanger Arm Rotation and tool Pull / Insert by Pneumatic