HEM H105LA-Cمناشير الفرقة الأفقي

صور ( 6 )

علامة تجارية
موديل
بطاقة الهوية
456130
السنة
2014
الموقع
Illinois
الولايات المتحدة الامريكية
رقم المخزن
12244

التنزيلات

HEM H105LA-C (2 MB )

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على HEM H105LA-C ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .

بطاقة الهوية
456130
علامة تجارية
موديل
السنة
2014
الموقع
Illinois
الولايات المتحدة الامريكية
رقم المخزن
12244

المواصفات

تحويل المواصفات للمتري
السعة المستطيلة (ارتفاع
16 "
السعة المستطيلة (عرض
20 "
القدرة
7.5 hp
عرض الريشة
1.25 "
سمك الريشة
0.04 "
طول الريشة
188 "

20' X 16" HEM SAW H105LA-C HORIZONTAL PIVOT, HEAVY-DUTY CUTTING PRODUCTION BAND SAW, 24" STROKE, MULTI INDEX, PROG FEED, 3RD VICE, BUNDLE CLAMPS NEW 2014
Specifications
HEM SAW H105LA-C HORIZONTAL PIVOT, HEAVY-DUTY CUTTING PRODUCTION BAND SAW
New 2014

Horizontal Pivot, Heavy-Duty, Metal-Cutting Production Band Saw
Capacity: 20" W x 16" H
Blade: 1-1/4" x 15'8" x .042"
Motor: 7.5 HP
Bar-feed: 0-24" (Multiple Indexes)
Easy View Console
The Control Console is located in an Easy View style control on a gooseneck mount, and can be pivoted for operator convenience.
24" Solid Discharge Table
A standard 24" solid discharge table provides easier handling after the cut. The table is 24" in length and is fully coolant panned.
0-24" Stroke Bar-Feed [Multiple Indexes]
The automatic Bar-Feed on the saw is comprised of an air operated shuttle vise feed system with a zero to 24" multiple index feed stroke. The feed table includes a vertical alignment bar and mechanical readout.
Computer Controlled Feed
The Standard Computer Controlled Feed System allows the operator to select a program for automatic operation. The operator can program the saw to automatically cut up to 99 different jobs of various lengths from the same bar. Lengths over 24 inches are automatically set and compensated.
Adjustable Main & Feed Vise
The saw vises slide on the vise ways. When the clamp is engaged, the air powered short stroking vise is pulled toward the fixed wear plate, clamping the material in place to ensure accurate cuts. The clamping pressure is easily adjusted to clamp various materials.
Hold Down Fixtures
Hold down fixtures also aid in the clamping of multiple pieces of material in a single row.
Adjustable Feed Rate & Cut Pressure
The saw arm Feed Rate can be adjusted from zero to 3 inches per second. Cutting pressure can be adjusted for effective metal removal rates.
Push Button Blade Speed
Blade speed can be adjusted with an infinitely variable speed drive from the console with push button controls. The blade speed is shown on the console with LED Readout.
Carbide Blade Guides
A blade guide system is composed of side and back guides, which are flat carbide inserts.
Manual Adjustable Guide Arm
The Guide Arm is adjusted manually to help stabilize the blade and reduce vibration, providing a better cutting surface.
Cut Watcher System
The patented Cut Watcher system monitors the cut for squareness to a pre-set deviation value. The system shuts down the saw when the pre-set value is exceeded. This is a must for production cutting.
Air Powered Blade Tension
The Air Powered Blade Tensioner helps to keep the blade at the proper tension. It assures and main¬tains proper blade tension at all times during the cutting process.
Blade Brush
A shaft-driven Blade Brush is standard for positive removal of metal chips that lodge in the blade gullets. This system ensures a cleaner blade, more accurate cuts, and prolonged blade life.
Chip Auger System
The Chip Auger removes chips from the cutting area into an easy-to-empty container. Chips and coolant are automatically separated into two different containers.
Built-In Flood Coolant System
The saw has a totally built-in coolant system with sealed coolant pump. The coolant is dispensed through the guide arms on both sides of the cut. A cutting fluid clean-up hose is provided for machine wash down.
Safety Features
The saw is equipped with a safety Emergency Stop cut-off switch. This allows the operator to closely monitor the cutting process and quickly stop it if needed.
The saw will automatically shut off if the blade breaks or is out of stock, shown by the Broken Blade or Out-of-Stock Indicators.
The Panic Stop haults all automatic functions.
Equipped With
3RD VICE FOR HOLDING MATERIALS
TOP CLAMPS ON MAIN AND FEED VICES
10’ MATERIAL FEED IDLE ROLLER TABLE
Locking vices
Spray mist lubrication
Flood mist selector switch

عن البائع

معلومات وجهة نظر الشركة

التنزيلات

HEM H105LA-C (2 MB )

الممزيد حول هذا النموذج

لعرض مزيد من المعلومات على HEM H105LA-C ، بما في ذلك المعلومات التجارية، والصور، والفيديو، وأكثر من ذلك، انقر هنا .