OROTIG RR WRITER 70Wماركات ليزر

صور ( 8 )

الثمن
علامة تجارية
موديل
بطاقة الهوية
456215
حالة
تستخدم - ممتاز
السنة
2016
رقم المسلسل
ML50144
الموقع
New Hampshire
الولايات المتحدة الامريكية
عودة السياسة
كما هو
بطاقة الهوية
456215
علامة تجارية
موديل
حالة
تستخدم - ممتاز
السنة
2016
رقم المسلسل
ML50144
الموقع
New Hampshire
الولايات المتحدة الامريكية
عودة السياسة
كما هو
الثمن

الوصف

For sale is a Orotig RR-WRITER 70 Watt Fiber Optic Laser Marker Engraver. This was purchased in 2016 and only used for 6 months, the unit currently works and has one minor modification. An exhaust port was installed on the right side of the cover for attachment of the exhaust vacuum system. It’s been crated up for shipping. This was purchased for $76,000 plus shipping. Shipped via freight to a local freight terminal, local pickup will then be required due to residential restrictions for freight and to keep cost competitive. Please make sure inspect package carefully prior to signing as insurance will not cover RR 70 watt HD Laser Engraver with SCAPS software & PC - $54,800 Rotary Motor + 1 Chuck - $3,675 Motorized Z Axis -$5,850 DRS 16 Dust Recovery System - $4,900 Automatic Feeder for Metal Strips - $7,120 The LASER-marker is a tool becoming almost indispensable to have in both the jewelry and industrial sectors. It is particularly useful for the marking of texts, logos, designs and graphic patterns. From serial numbering to photo engraving, the LASER-marker is perfect for customizing metallic objects or precious alloys. Features: • An integrated video camera facilitates the viewing of the LASER-marking area and ensures total control during the marking phase. • An adjustable Z-axis facilitates the focusing of pieces in the marking area, thanks to the aid of two high clarity pilot diode-LASERs. • Powerful enough to cut up to 1.5 mm - 2.0 mm thick metal plates, depending on the machine. • The "COLD-Light" technology, thanks to the scarce generation of heat, eliminates the need for pre-heating the equipment and avoids the use of auxiliary cooling devices. • Operating commands can be viewed and executed using either the machine’s control pad or the software. • The possibility to import images, models, logos, texts, etc., from a broad range of files with different extensions. • The RR-Writer by OROTIG could also be fitted with a rotary axis device, to facilitate LASER-marking of curved surfaces, such as the inside or outside of rings or bracelets. The main features of the LASER-marker RR-WRITER 70 can be summarized as follows: • Integrated camera for an optimal viewing of the marking area, allowing operators to better position objects to be marked/cut; • Digitally adjustable Z-axis for an easier focusing of pieces, guided by two high-brightness pilot diode-LASERs; • The “Cold-Light” technology, thanks to an extremely low heat generation, eliminates both the needs to preheat the equipment at start working as well as to use an auxiliary cooling device;
 • Operating commands are present on the machine, at its base, and, on the software for the remote control of operations by means of a PC; • Integrated control for the automatic on/off of the external vacuum device, recommended to be used to filter smokes inside and possibly recoup precious metal dust into provided paper-filters; • Possibility to import job files, with a wide range of extensions of images, vectorial drawings, logos, texts, pictures, ...

المواصفات

تحويل المواصفات للمتري
ماكس الليزر انتاج الطاقة
70 W
الأبعاد
17 X 30 X 26 IN
الوزن
380 LBS

عن البائع

معلومات وجهة نظر الشركة