SKODA SR 2000 مخارط المحرك
معلومات القوائم
بطاقة الهوية
460191
علامة تجارية
SKODA
موديل
SR 2000
النوع
مخارط المحرك
السيطرة
CNC (Siemens 840 D)
السنة
2001
حالة
تستخدم - ممتاز
الموقع
Georgia
الولايات المتحدة الامريكية
الولايات المتحدة الامريكية
الوصف
SKODA SR 2 – 200 NC CNC TURNING & MILLING CENTER
Excellent Condition
Features: • Siemens 840D Sinumerik CNC Control • Steady Rests • Chip Conveyor • Live Milling Tower • CE Marking•Documentation
Working Range:
Swing diameter over support 2,200 mm, Center height over bed 1,400 mm, Max. turning length 18000 mm
Equally workpiece weight between centers 56 Tons
Bed: Width over bedways 2500 mm
Height of the bed 750 mm, Spindle: Diameter in the front bearing 400 mm, Diameter of the clamping plate 2,000 mm, Diameter of the center (taper 1 : 10) 160 mm, Apex angle of the center 90 deg. Range of clamping diameter min. 1.035 mm, max. 1.600 mm
By using the attachments min. 100 mm
Headstock: Max. torque 90 kNm, Spindle speed min. 1 rpm
Chuck speed max. 400 rpm, No. of speed stages 3
C-Axis: Max. torque 90 kNm, Spindle speed (clamping plate) Spindle speeds 0.004 - 5 rpm
Milling Tower:
Turn of the column tower (B-axis) 0 - 180°, Feed length of the headstock along the column (Y-axis) -250 + +450 mm (to the axis of the machine) Feed rate of the headstock 1 + 2,500 mm/min. No. of spindles in the headstock 2
Spindle speeds in 2 steps 1 + 1,800 rpmMax. torque of the spindle by 112 rpm 2,800 Nm
Cone in the spindle ISO 50, Turret Sauter: Number of the indexing positions 4, Permissible vertical component of the cutting force at max. short tool length 440 mm of indexing axis 80 kN, Clamping height of the tool holder 140-DIN 69881 40 x 40 mm Tailstock: Quill diameter 450 mm , Tip diameter (cone 1:4) Roller Block:Range of diameter 600 – 1,500 mm
Carrying capacity 500 kN Closed Steady Rest:
Range of diameter 300 - 800 mm,
المواصفات
الأرجحة
86.614"
المراكز
708.66"
القدرة
147.5 hp
RPM
400 RPM
أرجحة فوق المجارى المتقاطعة
98.425"
الوزن
185 Tons